5086 H32 vs H116 aluminum alloy

Nov 20, 2025

Leave a message

5086-H32 and 5086-H116 aluminum alloys are both members of the 5000 series and are known for their excellent corrosion resistance and suitability for marine environments. These alloys are primarily alloyed with magnesium, which improves their strength and weldability. However, the two tempers differ in their processing methods, mechanical properties, and ideal applications.

5086 aluminum alloys are widely used in shipbuilding, aerospace, and structural components due to their strong corrosion resistance and good weldability. The key differences between the H32 and H116 tempers arise from their processing techniques, mechanical performance, and preferred usage conditions.

 

5086 H32 vs H116 Summary of Key Differences

Factor 5086-H32 5086-H116
Processing Strain-hardened and stabilized Strain-hardened (no thermal stabilization)
Corrosion Use General-purpose Marine/offshore
Ductility Slightly higher Slightly lower

What is the difference between 5083 H32 and H321?

5086 H32 vs H116 Alloy Composition and General Properties

Both 5086 H32 and 5086-H116 have similar chemical compositions and are non–heat-treatable alloys. Their strength is achieved through strain hardening or cold working.
These alloys are non-magnetic, highly weldable, and possess good formability, making them suitable for applications such as marine components, pressure vessels, and armored vehicles.

They also share similar tensile and yield strengths, although 5086-H32 offers slightly higher fatigue strength. The variations in mechanical performance mainly result from the different tempering processes used for each alloy.

 

5086 H32 vs H116 Standards and Certifications

H32: Meets U.S. standards (e.g., ASTM B928) and is widely used in North America.

H116: Meets European standards (EN 485-2) and is commonly adopted for international marine engineering projects.

 

5086 H32 vs H116 Corrosion Resistance

5086-H116 provides superior performance in marine environments due to its specialized processing, which effectively prevents intergranular corrosion and stress corrosion cracking in chloride-rich conditions.

H116: Optimized for harsh marine environments, offering enhanced seawater corrosion resistance without the need for heat stabilization.

H32: Suitable for general applications but may not perform as well as H116 in extremely corrosive environments.

 

5086 H32 vs H116 Temper Designations and Processing Methods

Temper Designations

5086-H32: Indicates the alloy has been strain-hardened to the H3 level and then stabilized. It provides a balance of strength and formability and is used for moderate-strength, general structural applications.

5086-H116: Indicates the alloy is strain-hardened to the H1 level without additional heat treatment. It is designed for higher corrosion resistance, particularly in marine applications, and complies with European standards (EN 485-2).

Aluminum Alloy Temper Meaning Description Applications
5086 H32 H3 Strain-hardened and stabilized to reduce internal stress; one-quarter hard temper, offering balanced strength and formability. Suitable for marine environments, structural components, shipbuilding, etc.
5086 H116 H1 Strain-hardened with no heat treatment; enhanced corrosion resistance, especially for marine use; "16" indicates compliance with EN 485-2. Primarily used in ship structures, seawater equipment, and offshore applications.

 

Processing Methods

H32: Cold worked and then stabilized, producing a semi-hardened material.

H116: Enhanced for corrosion resistance beyond the H32 temper, with special processing-such as controlled magnesium distribution-to further improve stability in marine conditions.

 

5086 H32 vs H116 Applications

H32: Used for structural parts requiring moderate strength and formability, such as storage tanks, automotive components, support structures, catwalks, and trench covers.

H116: Used for marine hulls, offshore platforms, pressure vessels, armored vehicles, and other applications requiring superior corrosion resistance.

 

Typical Application Overview

Alloy Typical Applications
5086-H32 Marine uses, support structures, catwalks, trench covers
5086-H116 Marine structures, pressure vessels, armored vehicle components

 

The choice between 5086-H32 and 5086-H116 ultimately depends on the application's strength requirements, corrosion exposure, and environmental conditions. For shipbuilding and intensive marine environments, H116 is the preferred option, while H32 performs well in general industrial applications. Although both offer strong corrosion resistance and weldability, their temper differences determine their most suitable uses.

 

GNEE supplies both 5086-H32 and 5086-H116 aluminum materials to meet diverse industrial and marine engineering needs.

5086 H32 vs H116