3104 Aluminum Coils Sheet: Composition, Tempers and Applications

Jan 22, 2026

Leave a message

3104 is a non-heat-treatable 3xxx series aluminum-manganese alloy with magnesium addition. It is widely supplied in coil and sheet form and is particularly well known for beverage can body production.

The alloy combines good formability, moderate strength, corrosion resistance, and relatively low density. These properties make 3104 suitable for applications where the material needs to be rolled, formed, drawn, painted, or printed while maintaining sufficient strength.

 

1. Chemical Composition

Element Content (%)
Mn 0.8–1.4
Mg 0.8–1.3
Fe ≤0.80
Si ≤0.60
Cu ≤0.25
Zn ≤0.25
Ti ≤0.10
Al Balance

The exact chemical limits can vary slightly depending on the applicable material standard. For commercial orders, the chemical composition should be confirmed against the required standard and mill test certificate.

 

2. Mechanical Properties by Temper

3104 is a non-heat-treatable alloy, meaning its strength is mainly controlled through cold working rather than solution heat treatment and artificial aging.

Temper Typical Tensile Strength Typical Elongation Typical Characteristics
O About 125–175 MPa Generally ≥15% High formability and deep drawing
H14 About 170–220 MPa Typically ≥5–10% Moderate strength and good formability
H18 About 210–260 MPa Typically ≥3–5% Higher strength and rigidity
H19 About 250–320 MPa Typically lower than H18 High-strength applications

Actual mechanical properties depend on product thickness, temper definition, applicable standard, and manufacturing route. Therefore, the values above should be treated as reference ranges rather than guaranteed specifications.

For beverage can production, the material is normally supplied in specialized tempers and gauges developed for the can-making process rather than simply selecting a general-purpose H14 or H18 sheet.

 

3. Production Process

3104 aluminum is produced by melting aluminum with controlled additions of manganese and magnesium. After casting, the material can undergo homogenization, hot rolling, cold rolling, intermediate annealing where required, and final rolling to achieve the specified thickness, mechanical properties, and surface quality.

 

For can-stock applications, production requires particularly tight control of thickness, flatness, surface condition, mechanical properties, and dimensional tolerances because the sheet must withstand high-speed forming and drawing operations.

Quality control may include chemical composition analysis, tensile testing, dimensional inspection, surface inspection, and other tests specified by the customer or applicable standard.

 

4. Key Properties of 3104 Aluminum

Good Formability

3104-O provides good ductility and is suitable for forming and drawing operations. Work-hardened tempers provide higher strength while retaining useful formability.

Balanced Strength

Manganese and magnesium provide solid-solution and work-hardening effects, allowing 3104 to achieve higher strength than commercially pure aluminum while maintaining good processability.

Corrosion Resistance

3104 offers good general corrosion resistance and is suitable for packaging, architectural, and many industrial environments. For severe exposure conditions, the complete material and surface-treatment system should be evaluated.

Surface Finishing

3104 can be coated, painted, lacquered, printed, or otherwise finished according to the application. This is particularly important for beverage cans, food packaging, and decorative products.

Lightweight

The density of 3104 aluminum is approximately 2.73 g/cm³, considerably lower than carbon steel, making it useful where low material weight is important.

Weldability

3104 can be welded using appropriate aluminum welding processes, including MIG and TIG. However, welding is not the primary reason for selecting this alloy. Filler metal, joint design, heat input, and the original temper should be evaluated for welded applications.

 

5. Applications

3104 aluminum is commonly used for:

Beverage can bodies

Food and beverage packaging

Can ends and closures

Aerosol and other packaging components

Architectural cladding and decorative panels

Ceiling panels and trim

Automotive and transportation components

Heat shields and selected heat-transfer applications

Toolboxes, containers, and equipment covers

General formed aluminum products

Its strongest commercial association is with beverage can body stock, where its combination of formability, strength, low density, corrosion resistance, and suitability for high-speed manufacturing is particularly valuable.

 

6. Supply Range and Standards

Typical commercial supply ranges may include:

Item Typical Range
Coil Thickness 0.3–5.0 mm
Sheet Thickness 0.3–200.0 mm
Width 100–2,500 mm
Coil ID 508 mm / 610 mm
Coil Weight About 50–5,000 kg
Form Coil, sheet, or cut-to-length

Actual production ranges depend on the mill's equipment and the required alloy, temper, thickness, and width.

Common standards include ASTM B209 for aluminum sheet and plate, EN 573-3 for chemical composition, and GB/T 3880 for wrought aluminum and aluminum-alloy plates, sheets, and strips.

 

When ordering 3104 aluminum coil or sheet, specify the alloy, temper, thickness, width, surface finish, quantity, packaging requirements, and applicable standard. A mill test certificate can be provided to document the chemical composition and mechanical properties of the supplied material.

3104 Aluminum Coils Sheet3104 Aluminum Coils Sheet3104 Aluminum Coils Sheet