Export Control Notice - These Grades Cannot Be Exported
7075 aluminum falls within these categories and is not available for export.
High-strength aluminum alloys of this class are listed under the export control regulations of the People's Republic of China for dual-use items and technologies. Shipping them out of China requires an export licence issued by the competent Chinese authorities. In practice a licence is not obtained for ordinary commercial orders in these categories, so GNEE does not export them.
GNEE does not export to any party or destination prohibited under applicable export control and international sanctions laws.
Control status technically turns on six variables: alloy grade, temper, product form, dimensions, quantity and intended end-use. Whatever the combination, none of the grades in the table below are available for export from GNEE.
Aluminum grades affected by these controls
| Alloy grade | Common temper(s) | Tensile strength (MPa) - reference |
|---|---|---|
| 7075 | T6 / T651 | 540 – 570 |
| 7075 | T73 / T7351 | 485 – 500 |
| 7075 | T76 / T7651 | 500 – 515 |
| 7050 | T7451 / T6 | 475 – 620 |
| 2024 | T351 / T4 | 425 – 470 |
| 7A04 | T6 | ≥ 530 |
| 2014 | T6 | approx. 460 – 500 |
| 2017 | T4 | approx. 390 – 480 (some specifications may reach higher) |
| 2195 | - | approx. 572 |
| 7068 | - | approx. 623 |
| 7055 | - | approx. 654 |
| 7150 | - | approx. 643 |
Strength values in this table are indicative reference ranges used for control classification. They are not specification minimums. The governing limits for any enquiry come from the applicable standard or your drawing.
What we can quote instead
We cannot accept export enquiries for the grades listed above. If strength is the reason you are looking at them, send us the load case, the service environment and the fabrication method, and we will quote a non-controlled substitute - usually from the 5xxx or 6xxx series - with properties that fit the job and no export restriction attached.
Product Detail
2024/3003/6061/6063/7075 Aluminum Hexagonal Bar In best quality
General Diameter: 1mm-500mm
General Length: 1m-6m
Application:
1. Aviation aluninum.
2. building mateial.
3. architectural appearance, outdoor design.
4. Indoor decoration: ceiling, etc
5. Funiture, cabinets.
6. lift, electric lift.
7. Car interior decoration.
8. Indoor decorations.
9. Household appliances: refrigerators, microwave ovens, audio equipment, ect.
10. Aerospace and military aspects, Big aircraft manufacturing, the shenzhou spacecrat series, satelites, ect.
11 Parts and mound making.
Picture Description




Packaging & Delivery
Packaging Details:
1. Standard expot seaworthy package.
2. It can packed by container or bulk vessel.
3. Packed as customers requirement.
Delivery:
Shipping method: Sea, Air, Express
Port: Shanghai or other major ports
FAQ
1. Are you a factory or trade company?
We are factory and trade company
2. How many staff do you have?
We have 103 workers
3. What is your delivery time?
10-15 days for customized size. 3-5 days for our Stock size.
4. What is your price?
High quality products with reasonable price
5. How many tons you can supply each month?
We can offer more than 3000 tons each month
6. What is the MOQ?
Above 1 tons, there is no MOQ for our STOCK SIZE
7. What is necessary information?
In order to get accurate quotation, the standard, material, outer diameter, wall thickness, quantity, destination port are necessary information.
