1235 H18 Lithium Battery Aluminum Foils: High-Purity Current Collector Solutions
1235 H18 Lithium Battery Aluminum Foils are premium industrial pure aluminum products, belonging to the 1xxx series with a minimum aluminum content of 99.35%. Engineered specifically as cathode current collectors for lithium-ion batteries, this foil combines the inherent advantages of high purity-excellent electrical conductivity and corrosion resistance-with the enhanced strength of H18 (full hard) temper. Unlike alloyed alternatives, 1235 H18 foils deliver uncompromised electron transfer efficiency while withstanding the rigors of high-speed battery production, including slitting, electrode coating, and winding. Widely adopted in new energy vehicles (NEVs), energy storage systems (ESS), and consumer electronics batteries, these foils comply with ASTM B209, EN 573-3, and GB/T 3880 standards, earning trust from global battery manufacturers for their consistency and reliability in high-performance battery assemblies.
The manufacturing of 1235 H18 Lithium Battery Aluminum Foils is a precision-focused process, where purity control and work hardening are critical to meeting battery industry demands. We start with high-grade 1235 aluminum ingots, strictly controlling iron (≤0.5%) and silicon (≤0.4%) impurities to avoid compromising conductivity and ductility. The ingots are homogenized at 450-480°C to eliminate internal stress and ensure uniform grain structure, a prerequisite for consistent rolling and tempering. Multi-pass cold rolling is performed to achieve ultra-thin gauges (0.01-0.03mm), followed by full work hardening to reach H18 temper-this process boosts tensile strength to meet battery production's mechanical requirements without sacrificing essential formability. Post-rolling, a rigorous cleaning process removes residual rolling oil to below 3mg/m² (detected via gas chromatography), preventing electrolyte contamination. Optional surface treatments, such as light pass rolling for smoothness or conductive coatings, are available to optimize compatibility with electrode slurries and battery electrolytes.
Core Performance Traits of 1235 H18 Lithium Battery Aluminum Foils
1235 H18 foils stand out as a top choice for lithium battery current collectors, thanks to their tailored combination of purity, strength, and conductivity. Key attributes include:
1. Superior Electrical Conductivity
With 99.35%+ aluminum content, 1235 H18 foils deliver exceptional electrical conductivity (≥58% IACS), outperforming alloyed foils like 3003 and 8011. For 0.012mm gauge foils, square resistance is controlled below 0.09Ω/□, minimizing internal battery resistance and enabling fast electron transfer across the cathode. This consistent conductivity across the entire foil surface prevents local current concentration, reducing the risk of overheating and extending battery cycle life-critical for NEV and ESS applications requiring thousands of charge-discharge cycles.
2. Enhanced Strength from H18 Temper
The full hard H18 temper imparts tensile strength of 180-210MPa, a significant upgrade over O-temper pure aluminum foils. This strength ensures the foil resists breakage and stretching during high-speed slitting (up to 600m/min) and electrode winding, processes that demand mechanical stability from ultra-thin materials. Even with this strength, the foil retains elongation ≥3%, balancing rigidity with the flexibility needed for battery cell assembly without cracking.
3. Excellent Electrochemical Stability
The high-purity composition and natural aluminum oxide layer provide reliable resistance to lithium-ion battery electrolytes. After 240 hours of immersion testing (per ASTM G67), corrosion weight loss is kept below 0.3mg/cm², preventing chemical reactions that degrade battery performance. This stability ensures the foil maintains structural integrity throughout the battery's lifespan, avoiding electrolyte contamination and internal short circuits.
4. Strict Dimensional Uniformity
Precision cold rolling achieves ultra-thin gauges (0.01-0.03mm) with tight thickness tolerance (±4% for 0.01-0.02mm foils) and transverse thickness fluctuation ≤±0.4μm (CV value <0.8%). Width tolerance is controlled to ±0.3mm for widths up to 1840mm, supporting automated electrode coating lines where even minor variations can cause uneven active material distribution and battery performance inconsistencies.
5. Optimized Surface Quality for Electrode Adhesion
Surface roughness is precisely controlled between 0.2-0.4μm, striking the perfect balance between smoothness and adhesion. The foil's wetting tension (dyne value ≥31mN/m) ensures seamless spreading of electrode slurries, promoting strong adhesion between the foil and active materials. The surface is free of pinholes, scratches, and oil residues, eliminating potential failure points in battery cells.
Product Specifications & Technical Details
We offer fully customized 1235 H18 lithium battery aluminum foils to match diverse battery designs and production needs. Key specifications are as follows:
1. 1235 H18 Foil Technical Parameters
|
Battery Type |
Thickness Range (mm) |
Width Range (mm) |
Surface Finish |
Key Customizations |
|
NEV Lithium-Ion Batteries |
0.012-0.020 |
800-1840 |
Double-Sided Light (DSL) |
Low oil residue, tight resistance control |
|
Energy Storage Systems (ESS) |
0.015-0.025 |
600-1600 |
Single-Sided Light (SSL) |
Conductive carbon coating |
|
Consumer Electronics Batteries |
0.010-0.015 |
200-800 |
DSL |
Ultra-thin gauge, high smoothness |
|
Lithium Iron Phosphate (LFP) Batteries |
0.018-0.030 |
500-1200 |
DSL/SSL |
Enhanced corrosion resistance |
2. Mechanical & Physical Properties
Mechanical Properties (H18)
Tensile Strength: 180-210MPa
Elongation (50mm): ≥3%
Bendability: No cracking at 3× thickness
Tensile Modulus: 70GPa
Electrical & Thermal Properties
Electrical Conductivity: ≥58% IACS
Square Resistance (0.012mm): ≤0.09Ω/□
Thermal Conductivity: 215 W/(m·K)
Resistivity: ≤3.0×10⁻⁸ Ω·m
Quality & Packaging
Oil Residue: <3mg/m²
Coil ID: 76.2/152.4mm (standard)
Coil OD: 800-1100mm
Compliance: ASTM B209, REACH, IEC 62133
Key Applications in Lithium Battery Sectors
1235 H18 aluminum foils are tailored for cathode current collection in lithium-ion batteries, serving as a critical component across new energy ecosystems. Core use cases include:
1. NEV Lithium-Ion Batteries
As a preferred cathode current collector for electric cars, buses, and trucks, 1235 H18 foils (0.012-0.020mm) deliver the perfect blend of conductivity and strength. Their high electrical efficiency boosts battery energy density and charge-discharge rates, while H18 temper strength resists the mechanical stress of high-volume electrode production. The strict dimensional control ensures uniform coating, critical for maintaining battery cell consistency in large NEV battery packs.
2. Energy Storage Systems (ESS)
Ideal for large-scale stationary ESS (grid storage, commercial backup) and portable energy storage. The foil's electrochemical stability ensures reliable performance over thousands of cycles, a key requirement for long-term storage systems. Optional conductive carbon coatings reduce interface resistance between the foil and electrode, further improving energy transfer efficiency and system lifespan.
3. Consumer Electronics Batteries
Ultra-thin 1235 H18 foils (0.010-0.015mm) are used in smartphones, laptops, wearables, and power banks, where miniaturization and lightweight design are paramount. The high conductivity ensures efficient power delivery in compact cells, while the H18 temper's strength prevents foil breakage during the precise winding of small battery cores. The smooth DSL finish enables thin, uniform electrode layers for slim battery profiles.
4. Lithium Iron Phosphate (LFP) Batteries
Well-suited for LFP batteries, widely used in ESS and budget NEVs. The foil's corrosion resistance stands up to the unique electrolyte chemistry of LFP systems, while its conductivity supports the high discharge rates required for these batteries. The 0.018-0.030mm gauge range balances mechanical stability and material efficiency, making it a cost-effective choice for high-volume LFP battery production.
5. Hybrid Electric Vehicle (HEV) Batteries
Used in HEV battery packs that require frequent charge-discharge cycles. The 1235 H18 foil's durability and consistent performance ensure long-term reliability under the dynamic operating conditions of HEVs. Its compatibility with standard battery manufacturing processes allows seamless integration into existing production lines, reducing setup costs for HEV battery manufacturers.
Handling & Fabrication Best Practices
Proper handling and fabrication are essential to preserve the performance of 1235 H18 lithium battery aluminum foils, especially for ultra-thin gauges. Follow these industry guidelines:
1. Storage & Handling
Store coils in a clean, dry environment (relative humidity ≤45%) to prevent oxidation. Use vacuum lifters or non-abrasive slings to avoid surface scratches and oil contamination-even minor scratches can cause local current concentration or reduce electrode adhesion. Keep coils sealed in moisture-proof, anti-static packaging until use, and avoid contact with corrosive substances (acids, alkalis) that damage the natural oxide layer.
2. Slitting & Cutting
Use high-precision slitting equipment with sharp blades to minimize burrs (burr height <4μm). Control tension during slitting to prevent stretching-critical for ultra-thin gauges (≤0.015mm) that are prone to deformation. For H18 temper foils, avoid excessive pressure that may cause edge cracking, and use edge-trimming tools to ensure clean, straight edges for electrode assembly.
3. Electrode Coating & Drying
Ensure the foil surface is free of oil and contaminants before coating-residual oil can weaken electrode adhesion and contaminate electrolytes. Maintain coating thickness uniformity to match the foil's surface roughness (0.2-0.4μm). Dry coated electrodes thoroughly to remove solvent residues, as trapped moisture can react with electrolytes and degrade battery performance.
4. Winding & Cell Assembly
Control winding tension to avoid foil wrinkling or cracking-H18 temper foils require moderate tension to prevent slippage without damage. Ensure alignment during cell assembly to prevent edge misalignment, which can lead to internal short circuits. Avoid contact with sharp tools during assembly to preserve the foil's surface integrity.
Our Quality Commitment & Customization Services
We understand that 1235 H18 lithium battery aluminum foils directly impact battery performance and safety-purity, consistency, and customization are non-negotiable. Our services include:
Strict Quality Control: Every batch undergoes purity testing (via spectroscopy), conductivity measurement, thickness profiling, and surface inspection. We provide detailed test reports with each shipment to ensure compliance with your battery production specifications and industry standards.
Tailored Solutions: Customize gauge, width, surface finish (DSL/SSL), and surface treatments (conductive coating, anti-oxidation) to match your battery design. We support small-batch trials (minimum 50kg) for new battery developments and large-volume production (1000+ tons) for mass manufacturing.
Clean Production Environment: Our facilities feature Class 1000 cleanrooms for post-rolling processing, minimizing dust and contamination-essential for battery-grade materials that demand ultra-clean surfaces.
Global Logistics Support: Coils are packaged in moisture-proof, anti-static film with sturdy wooden pallets to protect during transit. We offer on-time delivery to global battery plants, with batch shipping options to align with your production schedule.
1235 H18 lithium battery aluminum foils combine high purity, reliable strength, and exceptional conductivity-making them the ideal current collector for high-performance lithium-ion batteries. Whether you're producing NEV battery packs, large-scale ESS, or compact consumer electronics cells, we deliver consistent, high-quality foils tailored to your needs. Contact us today to discuss your specifications, request samples, or get a personalized quote for your battery production requirements.



