Overview of 1100 Aluminum Sheet
1100 aluminum sheet belongs to the 1xxx series of commercially pure aluminum. With a minimum aluminum content of 99.0%, it offers exceptional electrical and thermal conductivity, excellent corrosion resistance and outstanding formability. Because it contains almost no alloying elements, its strength is lower than that of alloyed grades, but its purity makes it the first choice for applications where conductivity, workability and surface quality matter more than mechanical strength.
Understanding the O, H14 and H18 Tempers
The temper designation determines the mechanical state of the sheet. O temper is fully annealed: the material is softened by heating, giving superior ductility for deep drawing and complex forming. H14 is strain-hardened and partially annealed, providing a balance of moderate strength and good formability for general fabrication. H18 is fully strain-hardened by cold rolling without subsequent annealing, delivering maximum strength and hardness with minimal ductility, ideal for parts that must hold their shape.
Manufacturing and Processing
H14 material is partially annealed after cold rolling to relieve internal stress while retaining enough strength for moderate forming. H18 is produced by full cold rolling without heat treatment, resulting in maximum hardness and dimensional stability. The O temper is obtained by complete annealing at roughly 300-400°C, which recrystallizes the microstructure to its softest state and enables deep drawing of complex shapes such as cookware and reflectors. Surface finishes include mill finish for industrial use and brushed or embossed textures for decoration, with thickness tolerances as tight as ±0.02 mm for precision components.
Key Properties
1100 sheet exhibits electrical conductivity of about 62% IACS, which is why it is widely used in electrical components. Its natural oxide layer provides dependable corrosion resistance in atmospheric, fresh water and many chemical environments. Density is low at about 2.71 g/cm³, and the material is non-toxic and food-safe. Available thicknesses commonly range from 0.2 mm to 6 mm, with standard widths from 500 mm to 2000 mm and custom slitting available.
Applications by Temper
In electrical engineering, 1100 sheet is used for busbars and transformer components where low resistance is critical. The chemical processing industry uses it for storage tanks and heat exchangers handling corrosive media, and the O temper allows seamless fabrication of intricate piping. In architecture, H14 is used for decorative panels while H18 suits structural components requiring stability. The food and pharmaceutical sectors rely on its non-reactive surface for packaging and sterilization equipment. H18 also serves lithographic printing plates and automotive parts, while O temper excels in deep-drawn cookware and reflectors.
FAQ
Q1: What is the difference between 1100 O, H14 and H18?
O is fully annealed with maximum formability and lowest strength; H14 is half-hard with a balance of strength and formability; H18 is full-hard with maximum strength and rigidity but minimal ductility. Choose according to the forming process and service requirements.
Q2: Can 1100 aluminum sheet be welded?
Yes, 1100 welds easily using TIG or MIG with 1100 or 4043 filler. It is one of the most weldable aluminum alloys, though joint strength is limited by the low strength of the base material.
Q3: Is 1100 sheet suitable for food contact?
Yes. 1100 is non-toxic and widely used in food packaging, cookware and food processing equipment. It is suitable for contact with food products under normal conditions of use.
Q4: Can 1100 sheet be anodized?
Yes, though the oxide layer on pure aluminum is relatively soft. Anodizing improves corrosion resistance and accepts dyes for decorative finishes, making it popular for architectural and consumer products.
Q5: What are the typical size ranges available?
Common supplies range from 0.2 mm to 6 mm in thickness, 500 mm to 2000 mm in width and up to 6000 mm in length. Custom sizes and slitting are available to match production requirements.
