1. What is 1060 H24 embossed aluminum coil?
1060 H24 embossed aluminum coil is a pure aluminum product (99.6% Al) with a H24 temper (strain-hardened and partially annealed), featuring a textured surface created by an embossing process. The embossing adds decorative patterns (e.g., diamond, stucco, or wood grain) while maintaining the coil's structural integrity. This type of coil combines the excellent corrosion resistance and formability of 1060 alloy with enhanced aesthetics. It is widely used in architectural decoration, signage, and interior design. The H24 temper provides a balance between strength and workability.
2. What are the key properties of 1060 H24 embossed aluminum coil?
The 1060 alloy offers high electrical/thermal conductivity and excellent resistance to atmospheric corrosion. The H24 temper ensures moderate strength (tensile strength ~110 MPa) with good ductility for bending or shaping. Embossing improves slip resistance and hides minor surface scratches. Its lightweight nature (2.7 g/cm³ density) simplifies installation. The material is also recyclable and environmentally friendly.
3. How is the embossing pattern applied to the aluminum coil?
Embossing is achieved by passing the coil through precision rollers engraved with the desired pattern under high pressure. The process occurs after cold rolling and tempering to avoid compromising mechanical properties. Patterns can be customized in depth (typically 0.1–0.5mm) and design. Quality control ensures uniform pattern replication across the coil. Post-embossing, protective coatings (e.g., PVDF) may be applied for added durability.
4. What are the primary applications of 1060 H24 embossed aluminum coil?
Common uses include ceiling panels, elevator interiors, and wall claddings for decorative appeal. It serves as a slip-resistant material for ramps or stair treads. In transportation, it's used for luggage compartments and RV interiors. The coil is also popular in DIY projects due to its ease of fabrication. Its non-toxic properties make it suitable for food packaging liners.
5. How does 1060 H24 embossed aluminum compare to other embossed alloys like 3003?
While 3003 (Al-Mn alloy) offers higher strength, 1060 is preferred for its superior conductivity and lower cost. Both share good formability, but 1060 is softer and easier to emboss with intricate designs. Corrosion resistance is comparable, though 3003 performs better in marine environments. The choice depends on balancing mechanical needs, budget, and aesthetic requirements.
