Aluminum Rod & Bar
Our aluminum rods and bars are manufactured from high-quality alloy grades including 1050, 1060, 1100, 3003, 5052, 5083, 6061, 6063, 6082 and 7075, covering a full range of applications from general industrial use to high-strength structural components. Available in round, square, flat and hexagonal solid profiles, they offer excellent machinability, formability, corrosion resistance and mechanical performance depending on the selected alloy.
All products are produced under international standards such as ASTM B211/B221, EN 573/755, JIS H4000 and GB/T 3190/6892, ensuring stable chemical composition and consistent quality. Surface finishes include mill finish, polished, anodized, brushed and customized treatments to meet specific application requirements.
With precise dimensional control, a size range from 3 mm to 500 mm, and customizable lengths up to 6000 mm, our aluminum rods and bars are widely used in machinery parts, automotive components, construction frameworks, marine equipment, electronics, molds and various fabrication industries. OEM and custom specifications are fully supported.
|
Chemical Composition |
|||||||||
|
Grade |
Al (%) |
Si (%) |
Fe (%) |
Cu (%) |
Mn (%) |
Mg (%) |
Zn (%) |
Cr (%) |
Notes |
|
1050 |
≥ 99.50 |
≤ 0.25 |
≤ 0.40 |
≤ 0.05 |
≤ 0.05 |
≤ 0.05 |
≤ 0.05 |
- |
Industrial pure Al |
|
1060 |
≥ 99.60 |
≤ 0.25 |
≤ 0.35 |
≤ 0.05 |
≤ 0.03 |
≤ 0.03 |
≤ 0.05 |
- |
High-conductivity grade |
|
1100 |
≥ 99.00 |
≤ 0.95 |
≤ 0.95 |
0.05–0.20 |
≤ 0.05 |
≤ 0.05 |
≤ 0.10 |
- |
Good corrosion resistance |
|
2011 |
Remainder |
≤ 0.40 |
≤ 0.70 |
5.0–6.0 |
≤ 0.30 |
≤ 0.10 |
≤ 0.30 |
- |
Excellent machinability |
|
2014 |
Remainder |
0.50–1.2 |
≤ 0.70 |
3.9–5.0 |
0.40–1.2 |
0.20–0.80 |
≤ 0.25 |
0.05–0.10 |
High strength |
|
2024 |
Remainder |
≤ 0.50 |
≤ 0.50 |
3.8–4.9 |
0.30–0.90 |
1.2–1.8 |
≤ 0.25 |
0.05–0.10 |
Aerospace alloy |
|
3003 |
Remainder |
0.20–0.60 |
≤ 0.70 |
≤ 0.20 |
1.0–1.5 |
≤ 0.05 |
≤ 0.10 |
- |
Good formability |
|
5052 |
Remainder |
≤ 0.25 |
≤ 0.40 |
≤ 0.10 |
≤ 0.10 |
2.2–2.8 |
≤ 0.10 |
0.15–0.35 |
Marine-grade |
|
5083 |
Remainder |
≤ 0.40 |
≤ 0.40 |
≤ 0.10 |
0.40–1.0 |
4.0–4.9 |
≤ 0.25 |
0.05–0.25 |
High-Mg, high strength |
|
6061 |
Remainder |
0.40–0.80 |
≤ 0.70 |
0.15–0.40 |
≤ 0.15 |
0.80–1.2 |
≤ 0.25 |
0.04–0.35 |
Most common Al-Mg-Si |
|
6063 |
Remainder |
0.20–0.60 |
≤ 0.35 |
≤ 0.10 |
≤ 0.10 |
0.45–0.90 |
≤ 0.10 |
≤ 0.10 |
Best for extrusion |
|
6082 |
Remainder |
0.70–1.3 |
≤ 0.50 |
≤ 0.10 |
0.40–1.0 |
0.60–1.2 |
≤ 0.20 |
0.25–0.40 |
Structural grade |
|
7075 |
Remainder |
≤ 0.40 |
≤ 0.50 |
1.2–2.0 |
≤ 0.30 |
2.1–2.9 |
5.1–6.1 |
0.18–0.28 |
Ultra-high strength |
Specification
|
Shape |
Round / Square / Flat / Hexagonal |
|
Temper |
O / H12 / H14 / H16 / H18 / H32 / H112 / T3 / T4 / T5 / T6 / T651 / T6511 / T7351 |
|
Grade |
1050 / 1060 / 1070 / 1100 / 2011 / 2014 / 2024 / 3003 / 3103 / 5005 / 5052 / 5083 / 5086 / 5454 / 5754 / 6005 / 6061 / 6063 / 6082 / 7005 / 7075 |
|
Size |
Round: Ø 3–500 mm |
|
Surface |
Mill Finish / Polished / Bright Finish / Anodized / Brushed / Sandblasted / Powder Coated / Black Anodized / Mirror Finish |
|
Standard |
ASTM B211 / ASTM B221 / ASTM B209 / EN 573-3 / EN 755-2 / EN 485 / JIS H4000 / JIS H4040 / GB/T 3190 / GB/T 6892 / ISO 209 |
Application
Aluminum rods and bars are widely used across multiple industries due to their excellent combination of strength, corrosion resistance, machinability and lightweight characteristics. Different alloy grades are selected according to specific application requirements.
1050 / 1060 / 1100 grades are commonly used in electrical conductors, busbars, heat dissipation devices, lighting parts, chemical storage, and general fabrication thanks to their high purity and excellent thermal and electrical conductivity.
3003 is preferred for HVAC components, heat exchanger fins, kitchen equipment and packaging machinery, offering good corrosion resistance and formability.
5052 / 5083 / 5086 / 5754 are widely used in marine structures, shipbuilding parts, offshore equipment, fuel tanks, pressure vessels and automotive panels, providing superior corrosion resistance and strong weldability in harsh environments.
6061 / 6063 / 6082 are mainstream materials for machinery parts, CNC components, structural frameworks, industrial equipment, transportation systems, bicycle frames, automation equipment and architectural profiles, thanks to their good strength-to-weight ratio, hardness and excellent machinability.
2011 / 2014 / 2024 are typically used for high-precision turned parts, aerospace fittings, fasteners, aircraft structures and high-load mechanical components, featuring high strength and excellent cutting performance.
7075 is ideal for aerospace parts, high-stress mechanical components, defense products, sports equipment, molds and precision fixtures, where ultra-high strength and toughness are required.
With broad alloy selections, multiple shapes (round, square, flat, hexagonal) and customizable dimensions, our aluminum rods and bars serve customers in automotive, aerospace, marine, construction, electrical engineering, machinery manufacturing, electronics, energy systems, transportation, mold fabrication, and general metalworking industries.
Company Profile
Core Business
Product Range:
Aluminum Alloys: Sheets, bars, tubes, coils, profiles, forging parts
Copper Alloys: Sheets, bars, tubes, coils, profiles
Stainless Steel: Sheets, bars, tubes, coils
Alloy Steel: Sheets, bars, tubes, coils
Special Alloys: Tailored to meet unique customer requirements
Customized Solutions:
We provide bespoke services including special sizes, shapes, and materials, catering to the diverse needs of our clients.
Innovation and Technology:
With advanced production facilities and an efficient logistics system, we ensure the highest quality of products and timely deliveries.
FAQ
Q: What are your main products?
A: Material: copper alloys, aluminum alloys, stainless steel, nickel alloys, alloy steel, high-speed steel, tool steel, mold steel, etc..
Type: plates, bars, tubes, coils, wires, profiles, etc..
Q: What payment methods do you accept?
A: We accept L/C and T/T payments. Other payment terms can be negotiated based on order details.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.
Q:Can you send samples?
A:Of course, we can send samples to all parts of the world.
Q: What's your delivery time?
A: Our normal delivery time is 7-20 days, and it depends on your quantity and items.