1050 H14 H24 Aluminum Sheet Overview – High-Purity Aluminum Solutions
If you are sourcing a high-purity aluminum sheet with excellent formability, corrosion resistance, and stable performance, 1050 Aluminum Sheet (H14 / H24) supplied by GNEE is a reliable choice for global industrial and commercial applications.
1050 Aluminum Sheet (H14 / H24) Product Introduction and Material Definition
1050 Aluminum Sheet, also referred to as AA1050 aluminum sheet, 1050 pure aluminum plate, or aluminum alloy 1050 sheet, belongs to the 1000 series aluminum alloys and contains a minimum aluminum content of 99.5%.
This non-heat-treatable aluminum is strengthened through cold working and is supplied mainly in H14 (half-hard) and H24 (strain-hardened and partially annealed) tempers. Thanks to its excellent surface quality, corrosion resistance, and conductivity, 1050 aluminum sheet is widely used in industrial fabrication, insulation systems, lighting components, cookware, signage, and electrical applications.
All products from GNEE are manufactured in accordance with ASTM B209, EN 573-3, and ISO 6361, meeting international B2B and export requirements.
1050 Aluminum Sheet (H14 / H24) Core Product Advantages
1050 aluminum sheet offers a combination of performance and economy, making it a preferred choice for many industries:
- Ultra-high aluminum purity (≥ 99.5%)
- Excellent corrosion resistance for humid and outdoor environments
- Superior formability for deep drawing, bending, spinning, and stamping
- Good electrical and thermal conductivity
- Lightweight structure with cost efficiency
- Environmentally friendly and fully recyclable
1050 Aluminum Sheet Chemical Composition (Typical Values)
Typical chemical composition of 1050 aluminum alloy:
| Element | Content (%) |
|---|---|
| Aluminium (Al) | 99.5 min |
| Copper (Cu) | 0.05 max |
| Iron (Fe) | 0.4 max |
| Magnesium (Mg) | 0.05 max |
| Manganese (Mn) | 0.05 max |
| Silicon (Si) | 0.25 max |
| Titanium (Ti) | 0.03 max |
| Vanadium (V) | 0.05 max |
| Zinc (Zn) | 0.05 max |
1050 Aluminum Sheet Mechanical Properties-H14 vs. H24 Temper
Typical mechanical performance of 1050 aluminum sheet:
1050 H14 Aluminum Sheet
Higher strength due to half-hard cold working
Suitable for flat panels and applications requiring rigidity
1050 H24 Aluminum Sheet
Slightly lower strength with improved elongation
Better choice for deep drawing and complex forming
H24 temper offers greater ductility, while H14 provides improved surface stability.
1050 Aluminum Sheet Available Specifications and Dimensions
GNEE 1050 aluminum sheet can be supplied with flexible specifications:
Thickness: 0.3 – 6.0 mm
Width: Up to 2000 mm
Length: Up to 6000 mm
Flatness tolerance: According to international standards
Custom sizes are available to meet specific project requirements.
1050 Aluminum Sheet Surface Finish Options
Surface treatments available for 1050 aluminum sheet include:
- Mill finish
- Bright finish
- Polished surface
- Anodizing-ready surface
These options allow the material to meet both functional and decorative needs.
1050 Aluminum Sheet Typical Industrial Applications
Thanks to its balanced properties, 1050 aluminum sheet (H14 / H24) is commonly used in:
- Thermal insulation cladding systems
- Lighting reflectors and lamp components
- Electrical busbars and conductive parts
- Kitchenware and food-contact products
- Signboards, nameplates, and decorative panels
- HVAC and ventilation components
1050 Aluminum Sheet Quality Inspection and Certification
Every batch of 1050 aluminum sheets from GNEE undergoes strict quality control, including:
- Chemical composition analysis (spectrometer testing)
- Mechanical property verification
- Thickness and dimensional inspection
- Surface quality checks
Quality documents provided include Mill Test Certificates (EN 10204 3.1), with SGS, BV, or TUV third-party inspection available upon request.
1050 Aluminum Sheet Export Packaging and Delivery Standards
For export shipment, 1050 aluminum sheets are packaged with:
- PVC protective film or interleaving paper
- Export-grade wooden pallets or wooden cases
- Moisture-proof, seaworthy packing
- Clear labels showing alloy, temper, size, and batch number
- This ensures safe containerized ocean transportation.
1050 H14 vs. 1050 H18 Aluminum Sheet Property Comparison
Compared with 1050 H18 aluminum, 1050 H14 aluminum offers higher elongation and better formability, while H18 provides increased strength but reduced ductility. Thermal and electrical properties remain nearly identical, making temper selection primarily dependent on forming and strength requirements.
1050 Aluminum Sheet Summary and Application Guidance
With its high purity, excellent corrosion resistance, stable conductivity, and outstanding formability, 1050 aluminum sheet (H14 / H24) is an ideal solution for industries that prioritize surface quality, workability, and cost efficiency over high structural strength.
Need a dependable supplier for 1050 Aluminum Sheet (H14 / H24)?
Reach out to GNEE today for technical consultation, competitive pricing, and customized aluminum sheet solutions tailored to your project needs.
