1050 Aluminum Sheet Overview
1050 aluminum sheet plate is a commercial pure aluminum product in the 1000 series aluminum sheet family, with an aluminum content of ≥99.5% in accordance with international standards. Thanks to its simple composition and mature manufacturing process, 1050 aluminum plate offers excellent cost performance and is one of the most widely used aluminum sheets in conventional industries.
As a typical industrial pure aluminum plate, 1050 aluminum sheet combines high plasticity, outstanding corrosion resistance, and excellent electrical and thermal conductivity, although it cannot be strengthened by heat treatment and has relatively low mechanical strength.
1050 Aluminum Sheet Specifications and Supply Range
1050 Aluminum Sheet and Plate Basic Parameters
| Item | Specification |
|---|---|
| Alloy | 1050 / AA1050 |
| Series | 1000 Series Aluminum Sheet |
| Temper | O, H12, H14, H16, H18, H19, H22, H24, H26, H32, H34 |
| Thickness | 0.2 – 150 mm (custom available) |
| Width | 20 – 2600 mm (custom available) |
| Length | Up to 11,000 mm |
| Color | Silver, RAL colors |
| Surface | Mill finish, brushed, polished, coated |
| MOQ | 3 tons |
| Standards | ASTM B209, GB/T 3880-2012 |
GNEE also supplies 1050 aluminum coil, strip, circle, disc, and plate products to meet diverse fabrication needs.
1050 Aluminum Sheet Chemical Composition Table
Chemical Composition of 1050 Aluminum Plate
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Ti | Al |
|---|---|---|---|---|---|---|---|---|
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | ≤0.07 | ≤0.03 | ≥99.5 |
1050 Aluminum Sheet Mechanical Properties by Temper
Mechanical Properties of 1050 Aluminum Plate
| Temper | Tensile Strength (MPa) | Elongation (%) |
|---|---|---|
| 1050-O | ~78 | ≥35 |
| 1050-H12 | ~95 | ≥18 |
| 1050-H14 / H24 | ~123 | ≥7 |
| 1050-H18 | ~140 | ≥4 |
1050 Aluminum Sheet Physical Properties
Physical Characteristics of 1050A Aluminum Plate
| Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Melting Point | ~640 °C |
| Elastic Modulus | ~73 GPa |
| Thermal Conductivity | 121–193 W/m·K |
| Thermal Expansion | 21.1 × 10⁻⁶ /K |
| Electrical Conductivity | ~61% IACS |
1050 Aluminum Sheet Advantages and Features
Key Advantages of 1050 Aluminum Plate
- Excellent corrosion resistance among all aluminum alloys
- High plasticity and outstanding formability
- Superior electrical and thermal conductivity
- Good weldability and brazability
- Soft, malleable, and easy to process
- Recyclable and environmentally friendly
- Lower cost compared with alloyed aluminum sheets
1050 H14 Aluminum Sheet vs H24 Aluminum Plate
Difference Between 1050 H14 and 1050 H24 Aluminum Sheets
| Item | 1050 H14 Aluminum Sheet | 1050 H24 Aluminum Plate |
|---|---|---|
| Process | Cold worked | Cold worked + partial annealing |
| Strength | Similar | Similar |
| Elongation | Lower | Higher |
| Application | General forming | Deeper drawing, bending |
1050 Aluminum Sheet Applications and Uses
Typical Applications of 1050 Aluminum Sheet and Plate
| Industry | Applications |
|---|---|
| Chemical Industry | Chemical equipment, containers |
| Construction | Facade signage, decorative panels |
| Transportation | Traffic signs, reflective plates |
| Lighting | Lamp reflectors, lighting housings |
| Electronics | Heat sinks, electrical components |
| Daily Use | Kitchenware, fan blades, nameplates |
1050 aluminum sheet is especially suitable for applications requiring high corrosion resistance and excellent formability, but not high structural strength.
1050 Aluminum Sheet Storage and Oxidation Prevention
How to Store 1050 Aluminum Sheet Properly
| Recommendation | Purpose |
|---|---|
| Dry, ventilated storage | Prevent surface oxidation |
| Avoid rain and moisture | Reduce spotting |
| Sealed packaging with desiccant | Control humidity |
| Control rolling oil moisture ≤0.4% | Improve surface quality |
| Delay unpacking after transport | Avoid condensation |
1050 Aluminum Sheet Comparison with Other Alloys
1050 Aluminum Sheet vs 1060 Aluminum Plate
Both belong to the 1000 series aluminum sheet, but 1060 aluminum contains slightly more aluminum (≥99.6%), making it marginally softer and more suitable for deep drawing. Performance differences are minor.
1050 Aluminum Sheet vs 5052 Aluminum Plate
5052 aluminum plate contains magnesium, offering higher strength and hardness, better for marine and load-bearing applications, but at a higher cost. 1050 aluminum sheet remains the economical choice for general-purpose use.
Why Choose GNEE for 1050 Aluminum Sheet Supply
GNEE is a professional manufacturer and exporter of 1050 aluminum sheets and plates, offering stable quality, large production capacity, and full certification. Each shipment can be supplied with mill test certificates and datasheets to ensure compliance and traceability.
Get Your 1050 Aluminum Sheet Quote from GNEE Now
If you are sourcing high-quality 1050 aluminum sheet or plate, contact GNEE today for fast quotations, technical support, and customized aluminum solutions tailored to your project needs.
