1050-H14 Aluminum Sheet Plate – Reliable 99.5% Pure Aluminum Solution
If you are searching for a cost-effective aluminum material with excellent corrosion resistance, high ductility, and stable conductivity, 1050-H14 aluminum sheet and plate from GNEE offer a proven solution for industrial and commercial applications worldwide.
1050 Aluminum Sheet Plate Material Overview – 1000 Series Pure Aluminum
1050 aluminum sheet and plate belong to the 1000 series of commercially pure aluminum alloys, containing a minimum of 99.5% aluminum. This alloy is valued for its superior corrosion resistance, excellent electrical and thermal conductivity, and outstanding formability.
Due to its purity, 1050 aluminum plate is not heat-treatable. Strength enhancement is achieved solely through cold working, making it ideal for applications where formability and surface quality are more critical than high mechanical strength.
1050-H14 Aluminum Sheet Temper Definition – Strain Hardened Plate
The H14 temper indicates that the 1050 aluminum sheet has been strain hardened to a half-hard condition, without subsequent annealing. This process increases strength and hardness while retaining adequate ductility for bending and forming.
Compared with 1050-O temper, 1050-H14 aluminum plate offers improved yield strength, making it suitable for general sheet metal processing where moderate rigidity is required.
1050 Aluminum Sheet Plate Standards and Equivalent Grades
Although 1050 aluminum sheet and plate do not have a dedicated ASTM flat-product specification, they are widely supplied under international equivalents:
EN AW-1050A (Europe)
JIS 1050P (Japan)
UNS A91050
ASTM standards for aluminum flat products begin from 1060 alloy (Al ≥ 99.60%), while ASTM B491 applies only to 1050 aluminum tubes.
1050 Aluminum Sheet vs Plate Thickness Classification
In industry practice:
1050 aluminum sheet: 0.2 mm – 6 mm
1050 aluminum plate: 6 mm – 500 mm
Both refer to flat-rolled products; the terminology is based purely on thickness.
1050 Aluminum Sheet Plate Chemical Composition
| Element | Content (%) |
|---|---|
| Aluminum (Al) | ≥ 99.5 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Zinc (Zn) | ≤ 0.07 |
| Titanium (Ti) | ≤ 0.05 |
| Others (each) | ≤ 0.03 |
1050-H14 Aluminum Sheet Physical Properties
Density: 2.71 g/cm³
Melting point: 650 °C
Thermal conductivity: 222 W/m ·K
Electrical resistivity: 0.0282 × 10⁻⁶ Ω ·m
Brinell hardness: ≈34 HB
These properties make 1050 aluminum plate suitable for electrical, thermal, and reflective applications.
1050 Aluminum Sheet Mechanical Properties by Temper
| Temper | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
|---|---|---|---|
| 1050-O / H111 | 65–95 | ≥20 | ≥20 |
| 1050-H12 | 85–125 | ≥65 | ≥2 |
| 1050-H14 | 105–145 | ≥85 | ≥2 |
| 1050-H16 | 120–160 | ≥100 | ≥1 |
| 1050-H18 | ≥135 | ≥120 | ≥1 |
| 1050-H24 | 105–145 | ≥75 | ≥3 |
1050 Aluminum Plate Specifications
| Category | Pure aluminum (AL 99.5% or more) |
|---|---|
| Status | H24, H14, H12, H26, H18, O |
| Thickness | 0.2mm-500mm |
| Width | 1000/1220/1250/1500/2000/2650 mm |
| Length | 2000 mm or 2500 mm (maximum) |
| Production Standards | ASTM B209, EN 485, GB/T 3880 |
| Equivalent to 1050 | AA 1050, Al99.5, EN AW-1050A |
| Surface Treatment | Mill Finish, Anodized Finish |
1050 Aluminum Sheet Plate Key Features
- Excellent corrosion resistance
- High ductility and formability
- Smooth and highly reflective surface
- Non-magnetic material
- Suitable for anodizing and chemical brightening
- Fully recyclable and environmentally friendly
1050 Aluminum Sheet Plate Surface Options from GNEE
GNEE supplies 1050 aluminum sheet and plate with multiple surface finishes:
- Mill finish
- Mirror finish
- Brushed aluminum
- Stucco embossed
- Diamond tread plate
- Perforated aluminum sheet
- Color-coated aluminum
- PVC-protected aluminum sheet
1050 Aluminum Sheet Plate Typical Applications
1050 aluminum alloy sheets and plates are widely used in:
- Electrical conductors and busbars
- Electronic housings and panels
- Cookware and food containers
- Building facades and roofing
- Chemical tanks and equipment
- Traffic signs and reflective panels
- Marine and lightweight structural components
1050 Aluminum Sheet Plate Supply Capability by GNEE
GNEE provides custom-cut and standard-size 1050 aluminum sheets and plates, with stable quality control covering chemical composition, mechanical properties, and surface finish to meet international market requirements.
