Source Premium 1050 Aluminum Sheet Solutions from GNEE
Looking for a high-purity aluminum sheet with excellent conductivity, corrosion resistance, and forming performance? GNEE supplies 1050 aluminum sheets and plates engineered to meet international standards and diverse industrial requirements worldwide.
1050 Aluminum Sheet Overview and Alloy Classification
1050 aluminum sheet is a commercially pure aluminum alloy belonging to the 1000 (1xxx) series wrought aluminum family. With an aluminum content of at least 99.5%, this alloy is not intended for casting but is produced through rolling or extrusion. Due to its outstanding electrical conductivity, corrosion resistance, and workability, 1050 aluminum plate is widely used in electrical, chemical, and general fabrication industries. It is also recognized for its high ductility and highly reflective surface finish.
1050 Aluminum Sheet Temper Options and International Standards
GNEE 1050 aluminum sheets are available in multiple tempers, including O, H12, H14, H16, H18, H22, H24, H26, H32, H34, H38, and H112, manufactured in compliance with ASTM B209, EN 573, and EN 485 standards. These temper options allow customers to select the ideal balance between strength and formability for specific applications.
1050 Aluminum Sheet Chemical Composition Table
| Element | Content (%) |
|---|---|
| Aluminum (Al) | ≥ 99.50 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Zinc (Zn) | ≤ 0.07 |
| Titanium (Ti) | ≤ 0.05 |
| Others (Each) | ≤ 0.03 |
| Others (Total) | ≤ 0.10 |
1050 Aluminum Sheet Mechanical Properties Table (H14 / H24)
| Property | 1050-H14 | 1050-H24 |
|---|---|---|
| Tensile Strength | 95–125 MPa | 90–120 MPa |
| Yield Strength | ≥ 75 MPa | ≥ 65 MPa |
| Elongation | ≥ 4% | ≥ 8% |
| Hardness (HB) | ~35 | ~30 |
1050 Aluminum Sheet Physical Properties Table
| Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Melting Point | 650 °C |
| Modulus of Elasticity | 71 GPa |
| Thermal Conductivity | 222 W/m ·K |
| Thermal Expansion | 24 × 10⁻⁶ /K |
| Electrical Resistivity | 0.0282 × 10⁻⁶ Ω ·m |
1050 Aluminum Sheet Available Specifications Table
| Item | Metric | Imperial |
|---|---|---|
| Thickness | 0.3 – 6.0 mm | 0.012″ – 0.236″ |
| Width | Up to 2000 mm | Up to 78.7″ |
| Length | Up to 6000 mm | Up to 236″ |
| Flatness Tolerance | As per standard | As per standard |
1050 Aluminum Sheet Temper Designation Table
| Temper | Description |
|---|---|
| O | Annealed (soft state) |
| H12 | Quarter-hard, strain-hardened |
| H14 | Half-hard, strain-hardened |
| H16 | Three-quarter hard |
| H18 | Full hard |
| H22 | Strain hardened and partially annealed |
| H24 | Half-hard + partial annealing |
| H26 | Three-quarter hard + partial annealing |
| H32 | Stabilized, strain hardened |
1050 Aluminum Sheet Applications Across Industries
1050 aluminum sheets and plates are used in a wide range of industries due to their purity and performance:
- Electrical conductors, busbars, and wiring
- Chemical storage tanks and processing equipment
- Food packaging and food-grade containers
- Architectural panels and decorative elements
- Lighting fixtures, reflectors, and solar components
- Heat exchangers and thermal systems
Its non-toxic nature and reflective properties make it particularly valuable in food and lighting applications.
1050 Aluminum Sheet Quality Control and Inspection Process
Every 1050 aluminum sheet supplied by GNEE undergoes strict quality assurance procedures, including:
- Chemical composition verification
- Dimensional and surface inspection
- Tensile and yield strength testing
- Compliance checks against ASTM and EN standards
- This ensures consistent quality, performance reliability, and full traceability.
1050 Aluminum Sheet Supply Advantages from GNEE
By choosing GNEE as your 1050 aluminum sheet supplier, you benefit from:
- Stable and high-purity raw materials
- Wide inventory and custom fabrication capability
- Competitive pricing and flexible MOQ
- Professional export packaging and logistics
- Technical support for alloy and temper selection
Get a Competitive Quote for 1050 Aluminum Sheet Today
Whether you need 1050 aluminum H14, H24, patterned sheets, embossed plates, or custom-cut sizes, GNEE is ready to support your project with reliable supply and expert service.
Contact GNEE today to receive pricing, technical details, and tailored aluminum solutions for your next application.
