1050 Pure Aluminum Checker Plate: Properties and Uses

Jan 05, 2026

Leave a message

What Is 1050 Checker Plate

1050 aluminum checker plate is a 1xxx series pure aluminum product with at least 99.5 percent aluminum, formed with a raised checkerboard pattern that provides slip resistance. The high purity gives exceptional ductility, formability, corrosion resistance, and electrical and thermal conductivity, while the pattern adds friction for flooring, stair treads, and ramps. The product complies with ASTM B209, EN 485-2, and GB/T 3880.

Core Advantages

The checker pattern significantly boosts friction, providing slip resistance even in wet or oily environments. The natural oxide layer gives good resistance to atmospheric corrosion, fresh water, and mild chemicals without additional treatment. At a density of 2.71 g per cubic centimeter, the material is much lighter than steel, simplifying handling and reducing structural load. Pure aluminum also delivers superior electrical and thermal conductivity for conductive and heat-dissipating applications.

Typical Specifications

Chemical composition is aluminum at least 99.5 percent with silicon up to 0.25 percent, iron up to 0.40 percent, and trace copper, manganese, magnesium, zinc, and titanium. Tempers include O with maximum ductility, H14 half-hard for structural use, and H18 full-hard for load-bearing components. Base plate thickness ranges from 1.5 to 8.0 mm with total thickness including the pattern from 2.5 to 10.0 mm, and standard sizes include 1000, 1220, and 1500 mm widths with 2440, 3000, and 6000 mm lengths.

Applications

Industrial flooring, walkways, stair treads, and loading ramps; truck and trailer flooring, bus step plates, and ship deck coverings; architectural cladding and interior panels; electrical enclosures and heat sinks; food and pharmaceutical processing floors; and coastal walkways with optional anodizing for enhanced protection.

Fabrication Guidance

Choose the O temper for complex forming, H14 for general use, and H18 for load-bearing components. Weld with ER1100 filler using TIG or MIG, clean surfaces before welding, and minimize heat input. Cut with laser, waterjet, or shears and deburr edges. Use aluminum or stainless fasteners to avoid galvanic corrosion, and leave expansion gaps in outdoor installations.

Frequently Asked Questions

Q: What is the aluminum content of 1050?

A: At least 99.5 percent.

Q: What tempers are available?

A: O, H14, and H18, from maximum ductility to full-hard strength.

Q: What pattern options exist?

A: Diamond, lentil, and round dot patterns with various cell sizes.

Q: Can 1050 checker plate be welded?

A: Yes, with ER1100 filler and proper surface cleaning.

Q: What thickness is available?

A: Base plate 1.5 to 8.0 mm.

Q: Why use aluminum fasteners?

A> To avoid galvanic corrosion between dissimilar metals.

For 1050 checker plate quotations with your required pattern and size, contact our sales team.