If you are looking for a high-purity aluminum tube with excellent corrosion resistance and superior formability, the 1050 aluminum tube from GNEE is an ideal choice. Contact GNEE today for technical support, datasheets, and competitive pricing tailored to your application needs.
Aluminum 1050 is a widely used aluminum grade for general fabrication and sheet metal applications where moderate strength is sufficient. Known for its excellent corrosion resistance, high ductility, and highly reflective surface, 1050 aluminum tube is especially suitable for applications requiring easy forming and long service life rather than high mechanical strength.
Scope of 1050 Aluminum Tube | General Characteristics
1050 aluminum tube belongs to the 1xxx series of commercially pure aluminum alloys, offering outstanding workability and chemical stability. Its high aluminum content ensures excellent resistance to atmospheric and industrial corrosion, making it a dependable material for a wide range of environments.
Applications of 1050 Aluminum Tube
Due to its purity and excellent forming characteristics, 1050 aluminum tube is commonly used in:
Chemical process plant equipment
Pyrotechnic powder applications
Lamp reflectors and lighting components
Food industry containers and tubing
Cable sheathing
Architectural flashings
Supplied Forms of 1050 Aluminum Tube and Related Products
GNEE supplies 1050 aluminum tubes and other aluminum products in multiple forms to meet diverse application requirements.
Supplied Forms
Plain sheet
Plain sheet with single-side PVC coating
Stucco sheet
Stucco sheet with single-side PVC coating
Patterned aluminum sheet
Other Aluminum Forms Available from GNEE
Aluminum Channels
Widely used in general fabrication and light construction. Aluminum U-sections and angles are applied in aerospace, architectural structures, automotive frameworks, and tracking systems.
Aluminum Plates
Designed for heavy-duty use in aerospace, military, rail, and marine industries, offering a strong yet lightweight solution with excellent corrosion resistance.
Aluminum Bars
Aluminum round bars are supplied in close dimensional increments, making selection easy for machining and fabrication applications.
Alloy Designations for 1050 Aluminum Tube
Aluminum alloy 1050 is also designated as:
AA1050A
S1B
UNS A91050
Temper Types of 1050 Aluminum Tube
The most common temper for 1050 aluminum tube is:
H14 – Cold-rolled to a half-hard condition and not annealed after rolling
This temper provides a good balance between strength and formability for general industrial use.
Fabrication Characteristics of 1050 Aluminum Tube
Fabrication Performance
| Process | Rating |
|---|---|
| Cold Workability | Excellent |
| Machinability | Poor |
| Gas Weldability | Excellent |
| Arc Weldability | Excellent |
| Resistance Weldability | Excellent |
| Brazability | Excellent |
| Solderability | Excellent |
Welding Recommendations for 1050 Aluminum Tube
For best welding results with 1050 aluminum tube, the following filler materials are recommended:
1100 filler wire: Welding 1050 to itself or alloys from the same subgroup
5356 filler wire: Welding to 5083, 5086, or 7xxx series alloys
4043 filler wire: Suitable for most other aluminum alloys
Chemical Composition of 1050 Aluminum Tube
Chemical Composition of Aluminium Alloy 1050 (Weight %)
| Element | Content (%) |
|---|---|
| Manganese (Mn) | 0.00 – 0.05 |
| Iron (Fe) | 0.00 – 0.40 |
| Copper (Cu) | 0.00 – 0.05 |
| Magnesium (Mg) | 0.00 – 0.05 |
| Silicon (Si) | 0.00 – 0.25 |
| Zinc (Zn) | 0.00 – 0.07 |
| Titanium (Ti) | 0.00 – 0.05 |
| Aluminum (Al) | Balance |
Mechanical Properties of 1050 Aluminum Tube (Room Temperature)
| Property | Value |
|---|---|
| Proof Strength | 85 MPa |
| Tensile Strength | 100 MPa |
| Elongation | 12% |
| Shear Strength | 60 MPa |
| Vickers Hardness | 30 HV |
Physical Properties of 1050 Aluminum Tube
| Property | Value |
|---|---|
| Density | 2.71 g/cm³ |
| Melting Point | 650 °C |
| Thermal Expansion | 24 × 10⁻⁶ /K |
| Modulus of Elasticity | 71 GPa |
| Thermal Conductivity | 222 W/m·K |
| Electrical Resistivity | 0.0282 × 10⁻⁶ Ω·m |
Typical Size Range of 1050 Aluminum Tube from GNEE
GNEE supplies 1050 aluminum tubes in both standard and customized dimensions.
Standard Size Table – 1050 Aluminum Tube
| Tube Type | Outer Diameter | Wall Thickness | Length |
|---|---|---|---|
| Round Tube | 6 – 300 mm | 0.5 – 20 mm | Up to 6000 mm |
| Square/Rectangular Tube | Custom | Custom | Cut to size |
Custom sizes, tolerances, tempers, and surface finishes are available upon request.
Important Notice
The information provided is for general guidance only and does not constitute a warranty of material properties. Actual performance may vary depending on temper, product form, and dimensions. Final material selection and processing responsibility remains with the user.
Contact GNEE for 1050 Aluminum Tube
If your project requires high-purity aluminum tubing with excellent corrosion resistance, superior formability, and stable performance, 1050 aluminum tube from GNEE is the right solution.
Contact GNEE today to request a quotation, technical consultation, or customized aluminum tube solutions.
