1050 1060 1070 H18 Hardness Aluminium Coils

Jan 13, 2026

Leave a message

1050, 1060 & 1070 H18 Hardness Aluminium Coils: High-Purity & High-Strength Solutions

Our 1050, 1060, and 1070 H18 hardness aluminium coils combine the natural advantages of high-purity aluminum with the enhanced strength of H18 temper, making them ideal for applications that demand both precision and structural stability. As core members of the 1xxx series (pure aluminum alloys with aluminum content ≥99%), these coils are processed through strict cold rolling and annealing procedures to achieve H18 full-hard state-delivering superior tensile strength and wear resistance without compromising key properties like conductivity and formability. Whether you're fabricating precision electronic components, structural architectural parts, or high-performance industrial components, our H18 hardness aluminium coils offer consistent quality, reliable performance, and seamless processability. Below, we break down their core properties, technical specifications, key applications, and processing insights to help you select the perfect grade for your project.

Crafted from premium high-purity aluminum ingots, our 1050, 1060, and 1070 H18 coils undergo a refined production process tailored to H18 temper requirements: precise melting to control impurity levels, continuous casting for uniform grain structure, multi-pass cold rolling to achieve the desired hardness, and final annealing to stabilize mechanical properties. We prioritize every detail of manufacturing-from strict thickness control (tolerance as low as ±0.02mm) to meticulous surface treatment that eliminates scratches, oil stains, and oxidation spots. The result is H18 coils with consistent hardness distribution, smooth surface finish, and excellent dimensional stability. Trusted by manufacturers and contractors across Europe, North America, Asia, and Latin America, our products are backed by rigorous quality inspections and customized solutions to match your specific production needs.

Core Properties of 1050, 1060 & 1070 H18 Hardness Aluminium Coils

1050, 1060, and 1070 all belong to the 1xxx pure aluminum series, with aluminum content increasing progressively (1050: ≥99.50%; 1060: ≥99.60%; 1070: ≥99.70%). The H18 temper-achieved through full cold rolling without intermediate annealing-endows them with significantly higher strength compared to annealed (O) temper. While sharing the high-purity foundation, subtle differences in purity make each grade uniquely suited for specific high-strength applications. Here are their key characteristics:

1. 1050 H18 Aluminium Coils (Al ≥99.50%)

Balanced Strength & Conductivity: 1050 H18 coils offer a tensile strength of 150-180 MPa-nearly double that of O temper-while retaining excellent electrical conductivity (62% IACS) and thermal conductivity (220 W/(m·K)). This balance makes it ideal for applications requiring both structural strength and efficient energy transfer, such as electrical bus bars and heat-dissipating structural parts.

Reliable Formability in Hard State: Despite being in full-hard H18 state, 1050 aluminum maintains good formability, capable of being bent, stamped, and cut into precise shapes. It's suitable for fabricating components that require post-processing without excessive deformation.

Excellent Corrosion Resistance: High purity ensures superior resistance to atmospheric corrosion, fresh water, and mild chemicals. A natural oxide layer forms on the surface, providing long-term durability in indoor and outdoor environments-ideal for exposed structural components.

Cost-Effective High-Strength Option: As a cost-competitive grade in the 1xxx H18 series, 1050 H18 offers an unbeatable balance of performance and affordability for general-purpose high-strength applications.

2. 1060 H18 Aluminium Coils (Al ≥99.60%)

Enhanced Purity & Performance: With slightly higher aluminum content than 1050, 1060 H18 coils deliver marginally better conductivity (60% IACS) and surface uniformity. The H18 temper provides a tensile strength of 150-180 MPa, making it suitable for applications that demand both high strength and precise surface quality.

Superior Surface Finish: Benefiting from higher purity and refined cold rolling processes, 1060 H18 coils feature an ultra-smooth surface (Ra ≤ 0.5 μm) free of defects. This makes them ideal for architectural and decorative applications that require both structural stability and aesthetic appeal, as well as for subsequent anodizing or painting.

Versatile Processability: 1060 H18 excels in cutting, slitting, and bending, with consistent mechanical properties across the entire coil. It's widely used in multi-process fabrication projects, from automotive components to industrial ducting.

Widely Applicable High-Strength Grade: As the most popular 1xxx H18 grade, 1060 H18 balances versatility, performance, and cost, making it a go-to choice for a wide range of industrial, commercial, and architectural applications.

3. 1070 H18 Aluminium Coils (Al ≥99.70%)

High Purity for Premium Performance: With the highest aluminum content (≥99.70%) among the three grades, 1070 H18 offers exceptional electrical conductivity (64% IACS) and thermal conductivity (230 W/(m·K))-the best in the 1xxx H18 series. It's the ideal choice for high-precision electrical and heat transfer applications requiring both high strength and maximum energy efficiency.

Superior Ductility in Hard State: Despite being full-hard H18, 1070 aluminum retains excellent ductility, allowing for complex forming processes like deep drawing and stamping. This makes it suitable for high-precision components that require both strength and intricate shapes.

Exceptional Corrosion Resistance: Ultra-high purity minimizes impurity-induced corrosion, giving 1070 H18 superior resistance to atmospheric conditions, fresh water, and mild chemicals. It's suitable for harsh environments where long-term durability is critical.

Premium Grade for Precision Applications: 1070 H18 is a premium high-purity, high-strength grade, ideal for applications like aerospace components, high-precision electronic parts, and medical equipment where quality and performance are non-negotiable.

Key Differences Between 1050, 1060 & 1070 H18 Aluminium Coils

Purity: 1070 (≥99.70%) > 1060 (≥99.60%) > 1050 (≥99.50%). Higher purity translates to better electrical/thermal conductivity, ductility, and corrosion resistance.

Conductivity: 1070 H18 (64% IACS) > 1050 H18 (62% IACS) > 1060 H18 (60% IACS). 1070 is the top choice for high-precision electrical and heat transfer applications.

Strength: All three grades in H18 temper have similar tensile strength (150-180 MPa) and yield strength (130-160 MPa), ensuring consistent structural performance across the range.

Cost & Application Focus: 1050 H18 is the most cost-effective, suitable for general-purpose high-strength applications; 1060 H18 balances versatility and performance for mainstream industrial/architectural use; 1070 H18 is the premium grade for high-precision, high-performance applications.

Technical Specifications of 1050, 1060 & 1070 H18 Hardness Aluminium Coils

Our 1050, 1060, and 1070 H18 coils are manufactured to strict international standards (ASTM B209, EN 485-2, GB/T 3880), with specifications tailored to meet the demands of high-strength and precision applications. Below are the detailed technical parameters:

1. Alloy Composition

1050 H18 Aluminium: Aluminum (Al) ≥ 99.50%, Silicon (Si) ≤ 0.25%, Iron (Fe) ≤ 0.40%, Copper (Cu) ≤ 0.05%, Zinc (Zn) ≤ 0.05%, Manganese (Mn) ≤ 0.03%

1060 H18 Aluminium: Aluminum (Al) ≥ 99.60%, Silicon (Si) ≤ 0.20%, Iron (Fe) ≤ 0.35%, Copper (Cu) ≤ 0.05%, Zinc (Zn) ≤ 0.05%, Manganese (Mn) ≤ 0.03%

1070 H18 Aluminium: Aluminum (Al) ≥ 99.70%, Silicon (Si) ≤ 0.10%, Iron (Fe) ≤ 0.25%, Copper (Cu) ≤ 0.03%, Zinc (Zn) ≤ 0.03%, Manganese (Mn) ≤ 0.03%

2. Mechanical Properties (H18 Temper)

1050 H18: Tensile strength = 150-180 MPa, Yield strength = 130-160 MPa, Elongation (50mm) = ≥5%, Hardness (HV) = 45-55

1060 H18: Tensile strength = 150-180 MPa, Yield strength = 130-160 MPa, Elongation (50mm) = ≥5%, Hardness (HV) = 45-55

1070 H18: Tensile strength = 150-180 MPa, Yield strength = 130-160 MPa, Elongation (50mm) = ≥6%, Hardness (HV) = 45-55

3. Dimensional Specifications

Thickness Range: 0.1 mm - 5.0 mm (common ranges: 0.1-0.5 mm for electronics/precision parts, 0.5-2.0 mm for architectural/automotive use, 2.0-5.0 mm for heavy-duty industrial components); Thickness tolerance: ±0.02 mm

Width Range: 800 mm - 2500 mm (custom widths available to minimize slitting waste; precise slitting ensures clean, burr-free edges)

Coil Weight: 300 kg - 5000 kg (custom weights for easy handling; tight winding prevents deformation during storage and transportation)

4. Surface Finish

Mill Finish: Natural rolling finish, Ra: 0.3-0.5 μm, smooth and uniform, free of scratches, oil stains, or oxidation spots

Anodized Finish (Optional): Clear or colored anodizing (10-20 μm thickness), uniform coating with excellent adhesion, enhanced wear resistance

Pre-Coated Finish (Optional): Polyester or PVDF coating (custom colors), superior corrosion resistance, suitable for outdoor applications

Polished Finish (Optional): Mirror or brushed finish, Ra ≤ 0.05 μm for mirror polish, ideal for decorative high-precision applications

5. Standards & Certifications

Compliance Standards: ASTM B209 (USA), EN 485-2 (Europe), GB/T 3880 (China)

Certifications: ISO 9001 (Quality Management System), ISO 14001 (Environmental Management System); Detailed Material Test Reports (MTR) available for each coil, including chemical composition, mechanical properties, and surface quality inspection results

Key Applications of 1050, 1060 & 1070 H18 Hardness Aluminium Coils

The combination of high purity and H18 hardness makes these coils suitable for a wide range of high-performance applications across industries. Below are the primary use cases, aligned with each grade's strengths:

1. Electrical & Electronic Applications

1070 H18: High-precision electrical bus bars, transformer windings, battery casings for high-end electronics, and LED heat sinks. Its ultra-high conductivity and H18 strength ensure efficient energy transfer and structural stability in compact electronic components.

1050 H18: General electrical components, power cables, and low-voltage switchgear parts. Balances conductivity and cost-effectiveness for mainstream electrical applications.

1060 H18: Electrical enclosures, circuit board supports, and medium-precision electronic structural parts. Versatile performance for a wide range of electronic assembly needs.

2. Architectural & Construction Applications

1060 H18: Architectural cladding, ceiling panels, decorative trim, and window frames. Its smooth surface finish, H18 strength, and formability make it ideal for structural decorative components that require both aesthetics and durability.

1050 H18: Indoor structural parts, heat insulation panels, and lightweight architectural brackets. Cost-effective high-strength solution for non-exposed architectural components.

1070 H18: High-end architectural decorative parts and precision building components. Premium surface finish and corrosion resistance for luxury projects.

3. Automotive & Transportation Applications

1060 H18: Automotive interior trim, heat shields, lightweight body panels, and trailer components. H18 strength ensures durability, while lightweight properties improve fuel efficiency.

1050 H18: Automotive air conditioning ducts, fuel line covers, and low-load structural parts. Cost-effective solution for automotive interior and undercarriage components.

1070 H18: High-precision automotive electronic components and aerospace lightweight parts. Ultra-high purity and strength for demanding transportation applications.

4. Industrial & Precision Components

1070 H18: Precision heat exchanger fins, medical equipment components, and aerospace structural parts. High conductivity, ductility, and strength for high-performance industrial applications.

1060 H18: Industrial ducting, ventilation systems, and precision machinery parts. Versatile processability and strength for mainstream industrial fabrication.

1050 H18: General industrial containers, tooling fixtures, and low-precision structural parts. Cost-effective high-strength solution for industrial mass production.

5. Packaging & Consumer Goods

1060 H18: High-strength food packaging cans, cosmetic packaging cases, and kitchen utensils. H18 strength ensures durability during transportation and use, while high purity meets food safety standards.

1050 H18: Mass-produced packaging containers and low-cost consumer goods. Cost-effective for high-volume packaging applications.

Processing & Fabrication Tips for H18 Hardness Aluminium Coils

H18 temper aluminium coils have higher strength than annealed grades, so proper processing techniques are key to maximizing product quality. Below are practical tips tailored to 1050, 1060, and 1070 H18 coils:

1. Coil Handling & Storage

Handle coils with soft slings or rubber-coated hooks to avoid scratching the surface. Avoid dropping or impacting coils, as H18 temper has lower ductility than O temper and may crack under heavy impact.

Store coils in a dry, clean, temperature-controlled warehouse (15-25°C, relative humidity ≤ 60%) away from moisture, dust, and corrosive substances. Wrap coils in moisture-resistant film for long-term storage to prevent oxidation.

Keep coils vertically on dedicated racks to prevent warping. Avoid stacking coils to prevent surface damage and deformation.

2. Cutting & Slitting

Use precision slitting equipment with sharp carbide blades to ensure clean, burr-free edges. For thin-gauge H18 coils (≤0.5mm), reduce slitting speed to avoid material tearing or edge deformation.

Adjust slitting pressure based on thickness-thicker coils (≥2.0mm) may require slightly higher pressure, while thin-gauge coils need gentle pressure to prevent damage.

3. Forming & Bending

Follow the recommended minimum bend radius: 3x material thickness for 1050/1060 H18, 2.5x for 1070 H18 (due to better ductility). Avoid sharp bends to prevent cracking.

For complex forming processes (deep drawing, stamping), pre-heat the material to 80-120°C to improve ductility. Cool the material naturally after forming to retain H18 hardness.

4. Welding & Joining

Weld using MIG/TIG welding with matching filler metals (ER1050 for 1050, ER1060 for 1060, ER1070 for 1070). Use low welding current to avoid burn-through and heat-affected zone softening (which may reduce hardness).

For mechanical joining, use aluminum or stainless steel fasteners to avoid galvanic corrosion. Pre-drill holes with sharp drill bits and moderate speed to prevent material chipping.

5. Surface Treatment

Before anodizing or painting, clean the surface with a mild alkaline cleaner to remove oil and oxide layers. The smooth mill finish ensures uniform coating adhesion-no additional sanding is required.

For anodizing, 1070 H18 produces the most uniform color due to its highest purity, followed by 1060 H18 and 1050 H18. This is ideal for decorative applications requiring consistent aesthetics.

Our Quality Assurance & Customization Services

We understand that high-strength and precision applications require reliable, consistent materials. That's why our 1050, 1060, and 1070 H18 hardness aluminium coils are backed by strict quality control processes and tailored customization services to meet your specific needs:

Strict Quality Control: Every coil undergoes multi-stage inspections: raw material purity testing (optical emission spectrometry), mechanical property testing (tensile, hardness), thickness uniformity checks (laser gauges), and surface quality inspections (automated vision systems). We ensure every coil meets H18 temper requirements and has consistent performance across the entire length.

Full Traceability: Each coil is assigned a unique batch number, enabling full traceability from raw material to finished product. We provide detailed MTR reports with every shipment, so you can verify the quality and specifications.

Tailored Customization: We offer custom thicknesses (0.1-5.0mm), widths (800-2500mm), and coil weights (300-5000kg) to match your production line. For surface finishes, we provide custom anodizing colors, pre-coating options, and polished finishes. Our engineering team can recommend the ideal grade based on your application's conductivity, strength, and cost requirements.

Technical & Logistics Support: Our team of aluminum experts provides personalized guidance on processing, forming, welding, and surface treatment for H18 temper coils. We offer free technical samples for testing, so you can verify performance before placing large orders. We use specialized packaging (protective film, anti-scratch liners, wooden crates) to ensure coils arrive in perfect condition and offer global shipping with on-time delivery guarantees.

Whether you need cost-effective 1050 H18 for general-purpose high-strength applications, versatile 1060 H18 for industrial/architectural use, or premium 1070 H18 for high-precision electrical/aerospace components, our products deliver the consistency, performance, and durability you need. Trust our expertise in 1xxx series H18 hardness aluminium alloys to provide solutions that optimize your production efficiency and end-product quality. Contact us today to discuss your specific requirements, request a technical sample, or get a customized quote.

1050 1060 1070 H18 Hardness Aluminium Coils1050 1060 1070 H18 Hardness Aluminium Coils1050 1060 1070 H18 Hardness Aluminium Coils