When choosing the fixing method for the side panels of aluminum profiles, it is necessary to decide based on the thickness of the sheet. The following are several commonly used fixing methods:
Punching + screw fixing
This method is relatively hidden and the operation is relatively simple. By punching holes in the sheet and fixing it with screws, a tight connection between the sheet and the aluminum profile can be ensured.
Sheet fixings
For thicker sheets, sheet fixings can be used. This fixing can be fixed directly to the profile to provide stable support. Interval connecting blocks are also another option, suitable for occasions where interval fixing is required.
🔹 Transparent 8-card 5-profile acrylic sheet inlay
This inlay can be transparently fixed to the profile, suitable for occasions where a transparent effect is required. 6-card 3-profile sheet inlay is another option, suitable for profiles of different specifications.
🔹 Semicircular fixings
For larger frames, in order to avoid the sheet from warping in the middle, semicircular fixings can be used. This fixing can be fixed to the side of the profile to provide additional support.
🔹 Interval connection block
Interval connection blocks are suitable for occasions where interval fixation is required, and the position of the plate can be flexibly adjusted. Various widths are available, such as the 40A right-angle piece with a width of 32mm, which is suitable for 40 profiles.
Through the above methods, the aluminum profile side panels can be easily fixed to ensure the stability and safety of the structure.
