Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of aluminium foil making food container in China. With abundant experience, we warmly welcome you to wholesale high quality aluminium foil making food container in stock here from our factory. Good service and reasonable price are available.
aluminium foil for making food container
Aluminum foil processing defects and measures:
Hot spots
The surface of alucoil protrudes along the rolling line, which leads to crushing and crushing seriouslyMainly in the finishing of the road outnow.
Essence is the aluminumcoil board face a certain position partial loose, cause it out of the aluminum foil to a director, do not drum.
The reason:
1 local expansion, roll, roll crown is too big.
2, forward slip is too big, bad lubrication.
3, narrow finish production, qian wide support roll material does not change.
4, The coolant jet is blocked or the cooling pressure is insufficient.
Product Details
| alloy | 3003/8011 |
| application | as container used for diffrent foods |
| thickness | 0.03mm-0.15mm |
| width |
200mm-1300mm |
| price | negotiation |
| packaging | free-fumigated woodon box |
| surface | Both sides bright |
aluminium foil for making food container Aluminum foil roll quality requirements? (1) The thickness of two pieces of aluminum foil should be uniform, and the thickness deviation is not more than ±3% (2) before rolling, the double surface is evenly sprayed with double oil. If the double oil is not evenly sprayed, the dark surface will produce color difference after rolling. (3) After winding, the cutting edge of each side should be 10-15mm, and there should be no crack, burr and edge clamping. Coiling trimming is to cut off the edge cracks and ensure the same width of two pairs of aluminum foil rolled.
(4) when rolling, there can be no wrinkling and discount phenomenon. For separate rolling aluminum foil, two pieces of aluminum foil, the tension is as consistent as possible, the tension is generally 10-20mpa, to avoid a loose and a tight, otherwise it is easy to cause rolling broken belt. (5) On the separate winding aluminum foil requires neat end face, no room layer, winding tension control should be reasonable, to avoid loose winding or "edge".
Hot Tags: aluminium foil making food container, China aluminium foil making food container manufacturers, suppliers, factory, Aluminium Foil Jumbo Roll For Food, Aluminium Foil For Food Jumbo Roll, Aluminium Foil Jumbo Roll 8011, Colored Foil Containers With Lids, Lacquered Aluminium Foil For Food Containers, 3003 H24 Aluminum Foil For Food Containers