Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of 8011 h24 aluminum foil roll in China. With abundant experience, we warmly welcome you to wholesale high quality 8011 h24 aluminum foil roll in stock here from our factory. Good service and reasonable price are available.
8011-H24 aluminum foil refers to the alloy grade 8011, state O state, its performance is better than pure aluminum foil.
8011-H24 aluminum foil rolling is divided into roughing, rolling, finishing three processes, from the point of view of the process, can be roughly divided from the rolled outlet thickness, the general division is the outlet thickness greater than or equal to 0.05mm for roughing, the outlet thickness of 0.013 ~ 0.05 for the middle of the rolled, the outlet thickness of less than 0.013mm of the finished product of the single sheet and the double combined The finished product is finish rolled. Rough rolling and aluminum sheet and strip rolling characteristics are similar, the thickness control depends mainly on the rolling force and post-tension, rough rolling processing rate thickness is very small, its rolling characteristics have been completely different from the rolling of aluminum sheet and strip, with the special characteristics of aluminum foil rolling, its characteristics are mainly the following aspects:
Aluminum sheet and strip rolling. To make aluminum sheet and strip thin mainly rely on the rolling force, so the automatic control of plate thickness is a constant roll gap for the main body of the AGC control mode, even if the rolling force changes, adjust the roll gap at any time so that the roll gap to maintain a certain value can also be obtained with a consistent thickness of the sheet and strip.
| Alloy Type | 1050, 1060, 1070, 1100, 1235, 3003, 3004, 5052, 8006, 8011, 8021, 8079 |
| Thickness &Tolerance | 0.006 ~ 0.2mm |
| Width | 10mm ~ 1500mm |
| Temper | O ~ H112 |
| MOQ | 3 ton |
| Sample | Free |
| Delivery Time | 7-25 days after order confirmation |
| Price Terms | FOB, CIF, CFR, CNF, etc. |
The aluminum foil rolling to the fine rolling, due to the thickness of aluminum foil is very thin, rolling, increase the rolling force, so that the roll to produce elastic deformation than the material to be rolled to produce plastic deformation easier, the elasticity of the roll flattening can not be ignored, the elasticity of the roll flattening decision of the roll in the rolling of aluminum foil, the rolling force has been less than the rolled sheet like the role of rolling aluminum foil rolling is generally in the constant pressure conditions of the roll without the roller seam, to adjust the thickness of the aluminum foil Mainly rely on adjusting the rear tension and rolling speed.
Packing & Delivery
1. Fumigated wooden box.
2. Iron pallets.
3. Water proof papers.
4. Interleaved paper.
5. PVC film.
6. Standard export sea-worthy packing or according to your requirement.
Stacked rolling. For the thickness of less than 0.012mm (thickness size and the diameter of the work rolls) of very thin aluminum foil, due to the elasticity of the rolls flattened, with a single rolling method is very difficult, and therefore the use of double rolling method, that is, the middle of the two foils plus lubricant, and then rolled together for the rolling method (also known as the stacked rolling). Stacked rolling can not only roll out a single rolling can not produce very thin aluminum foil, but also reduce the number of broken tape, improve labor productivity, the use of this process can be mass-produced 0.006mm ~ 0.03mm of single-sided light aluminum foil.
Hot Tags: 8011 h24 aluminum foil roll, China 8011 h24 aluminum foil roll manufacturers, suppliers, factory, Aluminium Foil Jumbo Roll 8011, Disposable Square Box Aluminum Foil, 3003 H24 Aluminum Foil For Food Containers, 3003 Food Grade Aluminum Foil, Aluminium Foil For Food Jumbo Roll, Silver Foil For Food