3003 Aluminum Foil For Food Container Making

3003 Aluminum Foil For Food Container Making

Due to the nature of continuous roll casting production, the high temperature aluminum water in the roll casting zone has experienced the roll surface cooling and solidification, three pressure deformation process, so the bad material contained in the as-cast organization, the recrystallization organization and deformation. As shown in figure 3, the slab with thickness direction difference caused by grain deformation under pressure is bigger, near the surface of the up and down the stretch deformation organization form, the slab middle area deformation under pressure cooling pass slower, smaller presence of as-cast organization and partial recrystallization organization.
Send Inquiry
Chat Now
Description

Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of 3003 aluminum foil for food container making in China. With abundant experience, we warmly welcome you to wholesale high quality 3003 aluminum foil for food container making in stock here from our factory. Good service and reasonable price are available.

 

Annealing stage, in view of the users requirements, the performance of air conditioner foil products using incomplete annealing process to meet the requirements of the finished half hard. 8011 alloy because the recrystallization temperature range is wide, adjustable product performance significantly. As the annealing process is different, can produce 8011 alloy H26 / H24, H22 and 0 state products correspond to different forming conditions of air-conditioning finned aluminum foil needs. H26 or H24 condition of 8011 aluminum alloy products as a result of the action of temperature setting and holding time, the group has not yet entered the stage of recrystallization grains, most for restoration of fibrous tissue. Can maintain higher intensity, moderate plasticity at the same time; H22 state recrystallization on stage, finished foil internal organization for the restoration of fibrous tissue, and a large number of homogeneous dispersion distribution point of recrystallization; 0 state in a fully recrystallization stage, internal organization of finished aluminium foil for uniform recrystallization organization, shown in figure 5 is recrystallization crystal point began to grow up.

 

 

 

3003 Aluminum Foil Jumbo Roll For Food Container Making

In the cold rolling production process, the cast-rolled slab continues to extend in the length direction as the rolling progresses, and the internal structure gradually peels off and undergoes deformation. From the production to the thickness of the finished product, the original three morphological structures are transformed into uniform elongated fiber structures under the total processing deformation rate of more than 98%.

 

 

Our Services

 

1. Reply you promptly in 24 hours about your enquiry and other products problem

2.You could choose payment terms as you like, such L/C,T/T, and so

3.Free samples for you to test

4.We could provide our quality control certifications

5.Any quality problem, we will provide you new free product

6.Delivery is on time

 

 

 

 

 

 

3003 Aluminum Foil  For Food Container Making

3003 Aluminum Foil  For Food Container Making

Hot Tags: 3003 aluminum foil for food container making, China 3003 aluminum foil for food container making manufacturers, suppliers, factory, aluminum foil roll, Jumbo Aluminum Foil Rolls 8011 Good Grade, easy to tear aluminum foil, HHF Aluminum Foil Rolls, Aluminum Foil 9 Micron Lamination Grade, 1060 Aluminum Foil Micron Thickness