Aluminum Flanges

Aluminum Flanges

GNEE supplies aluminum flanges for connecting aluminum pipes, valves, pumps, equipment, and other piping components. Available configurations include Slip-On, Weld Neck, Blind, threaded, and Socket Weld flanges, with custom dimensions available according to drawings and project requirements.
Send Inquiry
Chat Now
Description

Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of aluminum flanges in China. With abundant experience, we warmly welcome you to wholesale high quality aluminum flanges in stock here from our factory. Good service and reasonable price are available.

 

An aluminum flange is a flat or hubbed piping component used to create a bolted, detachable connection between pipes, valves, pumps, tanks, vessels, and other equipment. Two flanges are normally connected with bolts and a gasket, allowing the piping system to be assembled, disassembled, inspected, and maintained without cutting the pipe.

 

Compared with welded pipe connections, a flanged connection provides convenient access when equipment or piping components need to be removed or replaced. Aluminum flanges are particularly useful when low weight, corrosion resistance, and ease of handling are important.

 

GNEE manufactures and supplies aluminum pipe flanges for industrial, marine, and utility piping systems. Types available: Slip-On, Weld Neck, Blind, Threaded, Socket Weld. Alloys: 6061, 6082, 5083, 5086. Sizes: DN15 to DN600 (1/2" to 24"). Custom dimensions available per drawing.

Request a Quote

Aluminum Flange Types

 

Aluminum Slip-On Flange (SO)

Slip-on flanges slide over the pipe and are welded on the outside. Easy to align and install. Used for low to medium pressure piping.

Common uses:

General piping systems

Water and utility lines

Pump and valve connections

Equipment hook-ups

Aluminum Weld Neck Flange (WN)

Weld neck flanges have a tapered hub that butt-welds to the pipe. The hub reduces stress at the weld joint. Used where pressure and temperature conditions require a strong, reliable weld.

Common uses:

Process piping in chemical plants

Higher-pressure systems

Piping with temperature changes

Critical equipment connections

Aluminum Blind Flange (BL)

Blind flanges have no center bore. They close the end of a pipe, valve, or nozzle. Used for pipe ends, isolation, and future expansion points.

Common uses:

Pipe end closure

Valve and nozzle isolation

Maintenance access points

Future connection points

Aluminum Threaded Flange (TH)

Threaded flanges screw onto threaded pipe. No welding needed. Fast to install. Used in low-pressure systems where welding is not practical.

Thread options: NPT, BSPT, BSPP, Metric

Common uses:

Low-pressure piping

Instrument connections

Utility lines

Repair and maintenance work

Aluminum Socket Weld Flange (SW)

Socket weld flanges have a socket that the pipe fits into, then fillet-welded. Used for small-diameter pipes where a compact, strong connection is needed.

Common uses:

Instrument piping

Small-diameter utility lines

Hydraulic and pneumatic systems

Auxiliary connections

Aluminum Slip-On Flanges SO
Aluminum Slip-On Flange (SO)
Aluminum Welding Neck Flanges WN
Aluminum Weld Neck Flange (WN)
Aluminum Blind Flanges
Aluminum Blind Flange (BL)
Aluminum Threaded Flanges TH
Aluminum Threaded Flange (TH)
Aluminum Socket Weld Flanges SW
Aluminum Socket Weld Flange (SW)

Flange Comparison

Type

Pipe Connection

Best For

Typical Pressure

Alloy Notes

Slip-On

Fillet weld

General piping

Low to medium

All alloys

Weld Neck

Butt weld

Process piping

Medium to high

6061, 6082 for strength; 5083 for marine

Blind

Bolted

Pipe closure

Low to high

All alloys

Threaded

Threaded

Low-pressure

Low

6061 recommended

Socket Weld

Fillet weld

Small diameter

Low to medium

6061, 5086

 

Specifications of Aluminum Flange

Parameter

Specification

Product

Aluminum Flanges

Types

Slip-On, Weld Neck, Blind, Threaded, Socket Weld

Alloy

6061, 6082, 5083, 5086

Temper

6061 / 6082: T6, T651, O

 

5083 / 5086: H116, H321, O

Size Range

DN15 to DN600 (1/2" to 24")

Pressure Class

Class 150, Class 300 (ASME); PN6 to PN40 (EN)

Facing

Raised Face (RF), Flat Face (FF)

Bolt Holes

Per ASME B16.5 or EN 1092-1

Thread

NPT, BSPT, BSPP, Metric

Surface

Mill Finish, Machined, Anodized

Manufacturing

Forged or CNC Machined

Tolerance

Per ASME B16.5 / EN 1092-1 dimensional tolerances

Inspection

Dimensional, Visual, Material ID, Thread Gauging

Material Certificate

EN 10204 3.1 available

Lead Time

15 to 25 days (standard); 25 to 40 days (custom)

Packaging

Wooden pallets or plywood cases, export standard

Customization

OD, ID, PCD, bolt holes, thickness, facing

Note: Pressure ratings for aluminum flanges must be calculated based on alloy, temperature, and design. Steel flange pressure ratings do not apply to aluminum.

 

Aluminum Alloys

6061 Aluminum Flanges

6061 is a heat-treatable alloy with good strength and machinability. Common temper: T6. Good for machined flanges and threaded flanges. For welded assemblies, note that welding reduces strength in the heat-affected zone.

6082 Aluminum Flanges

6082 is similar to 6061 but with higher strength. Common temper: T6. Used for structural and industrial flange applications where higher mechanical properties are needed.

5083 Aluminum Flanges

5083 is a marine-grade Al-Mg alloy with excellent corrosion resistance and weldability. Common tempers: H116, H321. Used for shipbuilding, offshore, and marine piping systems.

5086 Aluminum Flanges

5086 is also a marine-grade alloy, similar to 5083 but with better formability. Common tempers: H116, H32. Used in marine and corrosion-resistant applications.

 

Applications of Aluminum Flanges

Industrial Piping

Aluminum flanges connect pipes, valves, pumps, filters, and heat exchangers. Common in chemical processing plants, water treatment facilities, and food and beverage industry.

Marine Piping

5083 and 5086 flanges are used in shipbuilding and offshore piping systems. Saltwater corrosion resistance makes them suitable for seawater lines, ballast systems, and deck piping.

Compressed Air Systems

Aluminum flanges provide lightweight, corrosion-resistant connections for compressed air lines. Easy to assemble and disassemble for maintenance.

Equipment Connections

Flanges allow pumps, valves, and filters to be disconnected for service without cutting the pipe. This reduces downtime and maintenance cost.

Industrial Piping
Industrial Piping
Marine Shipbuilding
Marine Piping
Compressed Air Utility Piping
Compressed Air Systems
Equipment Connections
Equipment Connections

Why Aluminum Flanges

  • Lighter Weight Aluminum weighs about one-third of steel. Easier handling, lower shipping costs, less structural load.
  • Corrosion Resistance Aluminum forms a natural oxide layer that resists corrosion. No extra coating needed for many environments.
  • Good Machinability 6061 and 6082 machine well. Suitable for precision flange components with tight tolerances.
  • Marine Grade Options 5083 and 5086 are proven in saltwater environments. Standard choice for marine fabrication.
  • Easy Maintenance Bolted flange connections allow quick disassembly. Valves, pumps, and equipment can be removed without cutting pipe.

 

Flange Dimensions

Dimension

Description

DN / NPS

Nominal pipe size

OD

Outside diameter

ID / Bore

Internal diameter

T

Flange thickness

PCD

Bolt circle diameter

D

Outside flange diameter

d

Bolt hole diameter

n

Number of bolt holes

A drawing prevents dimensional errors, especially for non-standard flanges.

 

Quality and Inspection

Inspection

Purpose

Material Identification

Confirm alloy (PMI or spectro)

OD / ID Measurement

Verify dimensions

Thickness Measurement

Confirm flange thickness

PCD Inspection

Check bolt-hole circle

Bolt Hole Inspection

Verify diameter and position

Facing Inspection

Check sealing surface

Thread Gauging

For threaded flanges

Visual Inspection

Check surface and machining quality

Material certificates available per EN 10204 3.1. Third-party inspection (SGS, BV) available on request.

Flange-test-equipment

Standards

  • ASME B16.5 - Pipe Flanges and Flanged Fittings (NPS 1/2 to NPS 24)
  • ASME B16.47 Series A and B - Large Diameter Flanges (NPS 26 to NPS 60), dimensional reference
  • EN 1092-1 - Flanges and their joints (European standard, dimensional reference)

Note: These standards define flange dimensions. Pressure ratings for aluminum flanges must be calculated separately based on alloy, temperature, and design. Steel flange pressure ratings do not automatically apply to aluminum.

Read More: Aluminum Pipe Fittings Standards

 

Custom Aluminum Flanges

Standard dimensions do not always fit project requirements. GNEE manufactures custom flanges per drawing:

Custom OD, ID, thickness

Custom PCD and bolt holes

Special facing or groove

Non-standard thread

Special alloy or temper

Send a 2D drawing, 3D CAD file, or complete dimensional spec for a quote.

Send an Inquiry Now

Why Choose GNEE

Direct manufacturer - Factory-direct pricing, no middleman markup

ISO 9001 certified - Quality management system in place

Material certificates - EN 10204 3.1 certificates with each shipment

Export experience - Shipping to 100+ countries worldwide

Custom CNC machining - Flanges machined to your drawings

Third-party inspection - SGS, BV available on request

 

GNEE ALUMINUM

DSC3146
DSC3079
DSC3105
DSC3086

DSC3080DSC3467

 

FAQ

What is an aluminum flange?

An aluminum flange is a machined component that connects pipes, valves, pumps, and equipment using bolts, welds, or threads.

What types do you supply?

Slip-On, Weld Neck, Blind, Threaded, and Socket Weld. Custom types available per drawing.

What alloys are available?

6061, 6082, 5083, and 5086. 6061 and 6082 for general industrial use. 5083 and 5086 for marine and corrosion-resistant applications.

What tempers are available?

6061 and 6082: T6, T651, O. 5083 and 5086: H116, H321, O. Other tempers on request.

Can aluminum flanges be used for marine piping?

Yes. 5083-H116 and 5086-H116 are standard marine grades with proven saltwater corrosion resistance.

Can you make custom flanges?

Yes. We machine custom flanges per drawing. Send your OD, bore, thickness, PCD, bolt holes, and alloy requirements.

Can aluminum flanges connect to steel pipes?

Yes, but galvanic corrosion occurs between aluminum and steel. Use insulating gaskets and sleeves to prevent direct metal contact.

What is the lead time?

Standard items: 15 to 25 days. Custom items: 25 to 40 days. Depends on quantity and complexity.

What information do I need for a quote?

Flange type, size, alloy, standard, pressure class, and quantity. A drawing is recommended for non-standard flanges.

 

Request a Quote

Send your flange requirements for a fast quote:

Flange type + size + alloy + standard + quantity

Drawing (for custom flanges)

Hot Tags: aluminum flanges, China aluminum flanges manufacturers, suppliers, factory