Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of solid aluminum panel in China. With abundant experience, we warmly welcome you to wholesale high quality solid aluminum panel in stock here from our factory. Good service and reasonable price are available.
Solid Aluminum Panel Description
GNEE aluminum solid panel is a non-combustible single-layer aluminium panel. It is prefinished with nice color and prefabricated into cassettes as per required shapes. It meets high façade cladding standards in most countries regarding fireproof and material strength.
Solid aluminum sheet is a material with high formability. It can be made of ordinary flat box panels, curved panels, double-curved panels, perforated panels, or laser-cut panels with different patterns.
Almost any shape or pattern required for architectural cladding design can be made with solid aluminum sheet.

The aluminum wall panel is made of a 1100 aluminum plate, a 3003 aluminum plate, or a 5005 aluminum alloy sheet. The aluminum wall panel is mainly composed of the aluminum panel, rib, bolt, and angle bracket.
Key Benefits of Solid Aluminum Panels
- Fire resistance: Single-layer aluminum panel meets EN 13501-1 Class A1 / GB 8624 Class A (non-combustible). Does not ignite or contribute to fire spread.
- Weather resistance: PVDF coating rated for long-term outdoor use from -40°C to 80°C. Color retention: ΔE < 3 after 10 years (per AAMA 2605 / weathering test data).
- Formability: Aluminum sheet can be formed into flat cassettes, single-curved panels, double-curved panels, perforated panels, and laser-cut patterns. Almost any cladding shape can be fabricated per drawing.
- Color options: Metallic colors, solid colors (RAL / Pantone), wood grain, stone grain. Custom colors available.
- Installation: Panels are pre-fabricated into cassettes with reinforcement ribs and angle brackets. Fixed to support frame with screws or clips. Installation is straightforward - no special tools required.
- Recyclable: 100% aluminum - fully recyclable at end of service life.


specification of Aluminum Panel
Chemical Composition (Mass Fraction) / %
| Grade | Si / Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Others (Each) | Others (Total) | Al (min) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1100 | ≤0.95 (Si+Fe) | 0.05–0.20 | - | - | - | 0.10 | 0.05 | - | 0.05 | 0.15 | ≥99.00 |
| 3003 | ≤0.70 | ≤0.05 | 1.0–1.5 | - | - | ≤0.10 | - | - | 0.05 | 0.15 | Remainder |
| 5005 | ≤0.70 | ≤0.20 | ≤0.20 | 0.50–1.1 | ≤0.10 | ≤0.25 | ≤0.05 | - | 0.05 | 0.15 | Remainder |
Mechanical Properties
| Grade | Temper | Tensile Strength Rm (MPa) | Yield Strength Rn0.2 (MPa) | Elongation A50 (%) | Bending Radius | Thickness (mm) |
|---|---|---|---|---|---|---|
| 1100 | H14 / H24 | 110–145 | ≥95 | ≥5 | - | 1.50–3.00 |
| 3003 | H14 | 145–195 | - | ≥3 | 1.0t | 1.50–3.00 |
| H24 | 145–195 | ≥115 | ≥5 | 1.0t | 1.50–3.00 | |
| 5005 | H14 | 145–185 | ≥120 | ≥3 | 1.0t | 1.50–3.00 |
| H24 | 145–185 | ≥110 | ≥5 | 1.0t | 1.50–3.00 |
Painting Dry Film Properties
| Property | Sub-Item | Test result | ||
| Dry Film Thickness | 2 coats PVDF spraying | 25μm (±5) | ||
| 3 coats PVDF spraying | 40μm (±5) | |||
| Powder coating | 60μm (min 50) | |||
| Gloss Value | ASTM D523-89 | 20-70 | ||
| Film Adhesion | Drying Adhesion | Grade 0 | ||
| Wet Adhesion | Grade 0 | |||
| Boiling Water Adhesion | Grade 0 | |||
| Dry Film Hardness | 2H | |||
| Hydrochloric Acid Resistance | No change | |||
| Mortar Resistance | No change | |||
| Solvent Resistance | No change | |||
| Abrasion Resistance | 5.2L/μm | |||
| Impact Resistance | 50kg·cm, no removal of film from substrate | |||
|
Parameter |
Specification |
|
Panel Thickness |
1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0 mm (up to 20mm on request) |
|
Max Panel Width |
1500 mm (single sheet); wider with welding |
|
Max Panel Length |
6000 mm |
|
Alloys |
3003 (standard), 1100, 5005 (optional) |
|
Temper |
H14, H24 |
|
Coating |
PVDF (2-coat: 25μm / 3-coat: 40μm), Powder coating (≥60μm), PE |
|
Coating Standard |
AAMA 2605 (PVDF) / AAMA 2604 (Powder) |
|
Color |
RAL / Pantone / wood grain / stone grain / metallic |
|
Shapes |
Flat cassette, single-curved, double-curved, odd-shape |
|
Patterns |
Perforated or laser-cut (custom designs) |
|
Fabrication |
Edge folding, curving, bending, reinforcement ribs, welding, brackets |
|
Fire Rating |
EN 13501-1 Class A1 / GB 8624 Class A |
|
Functions |
Fireproof, waterproof, anti-static (optional) |
|
Production Capacity |
20,000 m²/month |
|
Lead Time |
15–35 days (standard) / 25–45 days (custom) |
applications of Aluminum Wall Panel
It is mainly used for the decoration of the exterior walls of the buildings.
Facade Cladding
Interior Wall Decoration
Shopfront Decoration
Ceiling
Interior walls
ceilings
entrance halls
facades
wrapping columns
grid structure
outdoor floating sheds

GNEE aluminum cladding Panel processing procedures
Material selection - Aluminum sheet per specified alloy, temper, and thickness
Cutting - Sheet cut to panel dimensions (shearing or laser cutting)
Grooving - V-groove cutting along fold lines for precise edge folding
Bending / Folding - Edge folding to form cassette shape; curved panels rolled to required radius
Reinforcement - Attachment of aluminum reinforcement ribs and angle brackets (riveted or welded)
Welding - Corner welding where required for structural integrity
Grinding / Polishing-Surface preparation; weld seams ground smooth
Pre-treatment-Chromating or anodizing pretreatment for coating adhesion
Coating - PVDF spray (2-coat or 3-coat) or powder coating per specified color and standard
Curing - Oven curing per coating specification
Inspection - Dimensional, coating thickness, adhesion, color, surface quality
Packaging - Protective film + bubble wrap + corner protectors + wooden crate

why choose GNEE
GNEE has been manufacturing aluminum building materials for international projects since 2008. Our facility processes 20,000 m² of aluminum panels per month, serving customers in 100+ countries.
- In-house processing: cutting, bending, welding, perforating, laser cutting, coating
- Alloys: 1100, 3003, 5005 - per project specification
- Coating systems: PVDF (AAMA 2605), powder coating (AAMA 2604), PE
- Custom fabrication per drawing: flat, curved, perforated, laser-cut
- Certifications: ISO 9001 / CE / other
- Export packaging: protective film + bubble wrap + corner protectors + wooden crates
- Third-party inspection available: SGS, BV, TUV



Hot Tags: solid aluminum panel, China solid aluminum panel manufacturers, suppliers, factory, rolled aluminum sheet, furniture aluminum sheet, rigid aluminum sheet, wide aluminum sheet, heat sink aluminum sheet, oem aluminum sheet




