Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of 5052 aluminum sheets in China. With abundant experience, we warmly welcome you to wholesale high quality 5052 aluminum sheets in stock here from our factory. Good service and reasonable price are available.
5052 aluminum plate Description
5052 aluminum plate for AL-Mg system alloy aluminum plate, magnesium is the main alloying element in the 5052 alloy aluminum plate, is the most widely used kind of rust-proof aluminum, this alloy has high strength, especially with fatigue strength: plasticity and corrosion resistance is high, can not be heat-treated to strengthen, in the semi-cold-working hardening of the plasticity is still good, the plasticity of the cold working hardening of the plasticity of the cold-working hardening of the low, corrosion resistance is good, weldability is good, the machinability of poor performance, can be polished.
5052 aluminum plate Specification
| Parameter | Range/Value |
|---|---|
| Thickness | 0.15 mm (ultra-thin) – 600 mm (extra-thick); |
| Condition | O state (soft state), H32 (semi-hard state), H34 (full hard state); |
| Tensile Strength | O state：170–210 MPa;H32：230–280 MPa; |
| Surface Treatment | Brushing (straight/random), anodizing, painting; |
| Width/Length | Standard panel widths 1000–2600 mm, custom lengths available |
5052 aluminum plate Advantages
1. Excellent corrosion resistance
It has significant corrosion resistance in seawater and salt spray environments, which is better than ordinary aluminum and some stainless steels;
The chromium element forms a passivation film to inhibit pitting and stress corrosion cracking.
2. Medium strength and high fatigue resistance
Tensile strength: 170–305 MPa (H32 state can reach 230–280 MPa);
Fatigue limit: It is not easy to break under cyclic loads, suitable for vibrating parts (such as vehicle chassis).
3. Excellent processing performance
Cold formability: O state (soft state) has high elongation, suitable for deep drawing and bending (qualified rate>95%);
Weldability: Good compatibility with argon arc welding and spot welding, and the weld strength reaches more than 90% of the matrix.
4. Special environmental adaptability
Low temperature toughness: Remains plastic at -196℃, no tendency to embrittlement (applicable to liquefied natural gas tanks); Surface treatment compatibility: Excellent decorative and wear resistance after drawing (Ra 0.4–0.8 μm) and anodizing.
5. Limitations
Cannot be heat-treated and strengthened: Strength decreases significantly at high temperature (＞150℃); Poor cutting performance: Easy to stick to the knife, special tool processing is required.
5052 aluminum plate Applications
1. Transportation
Scenario: Automobile fuel tanks, oil pipes, body sheet metal; ship decks, bulkheads; Function: Lightweight to reduce energy consumption, corrosion resistance to extend component life; Typical specifications: Thickness 1.0–6.0 mm (body panels), 3.0–10.0 mm (ship sheet metal).
2. Aerospace
Scenario: Aircraft fuel tanks, hydraulic pipelines; Function: High specific strength supports structural safety, and fatigue resistance adapts to high-frequency vibration environments; Typical specifications: Thin plates 0.5–2.0 mm (fuel tanks), medium plates 2.0–5.0 mm (structural parts).
3. Electronics and Architecture
Scenario: Electrical housing, radiator; curtain wall, roofing materials;
Function: The brushed surface is both decorative and wear-resistant (Ra 0.4–0.8 μm), with excellent thermal conductivity (138 W/m·K);
Typical specifications: 0.15–3.0 mm (electronic housing), 2.0–8.0 mm (building curtain wall).
4. Energy and Chemical Industry
Scenario: Liquefied natural gas storage tanks, corrosive gas absorbers;
Function: Low temperature resistance ensures safety in extreme working conditions, and is resistant to weak acid and alkali corrosion;
Typical specifications: Thick plate 6–50 mm (pressure vessel).
5. Bridge manufacturing
Scenario: cable support frame, communication bridge frame;
Function: lightweight to reduce installation costs, recyclability meets environmental protection requirements;
Typical specifications: 1.5–4.0 mm (H32 state, tensile strength ≥230 MPa).
GNEE 5052 aluminum plate for sale
5052 aluminum plate inspection
Hot Tags: 5052 aluminum sheets, China 5052 aluminum sheets manufacturers, suppliers, factory, wholesale aluminum sheet, i beam shaped aluminum sheet, curtain wall aluminum sheet, 5052 Aluminum Sheets, cast aluminum sheet, value for money aluminum sheet