Henan Gnee New Material Co., Ltd. is one of the most reliable manufacturers and suppliers of 1050 1060 1100 pure aluminum rod in China. With abundant experience, we warmly welcome you to wholesale high quality 1050 1060 1100 pure aluminum rod in stock here from our factory. Good service and reasonable price are available.
1050 1060 1100 Pure Aluminum Rod Description
I. Material Properties Comparison
| Grade | Chemical Composition (Al Content) | Density | Tensile Strength | Electrical Conductivity (IACS) | Key Advantages |
|---|---|---|---|---|---|
| 1050 | ≥99.5% | 2700 kg/m³ | 70–110 MPa | 61% | High plasticity, easy welding, corrosion resistance |
| 1060 | ≥99.6% | 2700 kg/m³ | 80–120 MPa | 62% | Ultra-high purity, excellent conductivity |
| 1100 | ≥99.0% | 2710 kg/m³ | 90–140 MPa | 59% | Good machinability, flexible surface treatment |
II. Core Application Scenarios
1050 Pure Aluminum Rod
Daily Necessities: Lamp reflectors, decorative base material (1050 round bars can be anodized and colored)
Industrial Containers: Chemical storage tanks, corrosion-resistant piping (suitable for pH 4.5–8.5 environments)
Heat Dissipation Components: LED heat sink rods (thermal conductivity 237 W/m·K)
1060 Pure Aluminum Rod
Conductive Components: Power device wiring, busbars (resistivity 28.3 nΩ·m)
Precision Stamping: Capacitor shells, nameplate stampings (elongation ≥25%)
Food Packaging: Food-grade container lining (compliant with FDA food contact standards)
1100 Pure Aluminum Rod
Automotive Parts: Interior and exterior brackets, wire harness clips (good for cold heading)
Architectural Decoration: ACP cores, indoor ceiling frameworks (applicable to fluorocarbon coating)
Heat Exchange Systems: A/C condenser pipes, heat exchanger components (temperature range -50℃~150 ℃)
III. Processing and Performance Advantages
| Grade | Processing Characteristics | Surface Treatment Compatibility | Environmental Adaptability |
|---|---|---|---|
| 1050 | Gas/TIG welding pass rate >98% | Anodized film thickness 10–25 μm | Salt spray resistance >480 h (CASS test) |
| 1060 | Cold rolling elongation up to 40% | ≤ 0.2 μm | Acid/alkali resistant (10% HCl weight loss <0.1 g/m²/h) |
| 1100 | Max drawing ratio in stamping: 2.0 | Powder coating adhesion rating 4B | Oxidation resistance (weight gain <2mg/cm² @ 800℃ high temp) |
IV. Standard Packaging Specifications
| Parameter | 1050 | 1060 | 1100 |
|---|---|---|---|
| Diameter Range | Φ10–150 mm | Φ10–200mm | Φ8–120mm |
| Standard Length | 1–6m (±10mm) | 1–6m (±10mm) | 1–6m (±10mm) |
| Packaging Method | Waterproof film + wooden pallet | Shrink wrap and steel frame | PE bag + anti-shock paper cradle |
Chemical Composition of 1060 Aluminum Rods
| Element | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti |
| Content | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | – | 0.05 | 0.03 |
Mechanical Properties of 1060 Aluminum Rods
| Properties | Metric | Imperial |
| Tensile strength, yield | 485 MPa | 70300 psi |
| Modulus of elasticity | 190-210 GPa | 29700-30458 ksi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
Applications of 1060 Aluminum Rods
| Industry | Use Cases | Why 1060? |
| Electrical | Busbars, connectors, cable shielding | High conductivity, lightweight, non-sparking |
| HVAC & Cooling | Heat exchangers, radiator fins | Efficient thermal transfer, corrosion-resistant |
| Construction | Decorative trims, window frames | Easy anodizing, weatherproof finish |
| General Fabrication | Machined parts, rivets, fasteners | Excellent machinability, cost-effective |
Chemical Composition of 1100 Aluminum Rod (EN 573-3)
The 99% purity of the 1100 aluminum rod ensures high corrosion resistance, excellent conductivity, and superior workability.
| Chemical Element | % Present |
| Si + Fe | 0.95 max |
| Cu | 0.05 – 0.20 |
| Mn | 0.05 max |
| Zn | 0.10 max |
| Other (Each) | 0.05 max |
| Others (Total) | 0.15 max |
| Aluminium (Al) | 99% |
Aluminium 1050 Data Sheet - Chemical Composition
| Element | Content (%) |
| Aluminum (Al) | ≥ 99.5 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.05 |
| Magnesium (Mg) | ≤ 0.05 |
| Manganese (Mn) | ≤ 0.05 |
| Zinc (Zn) | ≤ 0.07 |
| Titanium (Ti) | ≤ 0.05 |
| Other Elements | ≤ 0.03 (individual) |
Aluminium 1050 Data Sheet-Mechanical Properties (H14 Condition, Typical Values)
| Property | Parameter |
| Tensile Strength (MPa) | 105–145 |
| Yield Strength (MPa) | ≥ 85 |
| Elongation (%) | ≥ 12 |
| Brinell Hardness (HB) | 34 |
Aluminium 1050 Data Sheet - Physical Properties
| Property | Parameter |
| Density (g/cm³) | 2.71 |
| Melting Point (°C) | 650 |
| Elastic Modulus (GPa) | 71 |
| Thermal Conductivity (W/m·K) | 222 |
| Coefficient of Thermal Expansion (×10⁻⁶/K) | 24 |
| Electrical Resistivity (Ω·m) | 0.0282 × 10⁻⁶ |
about us
GNEE was founded in 2008. Our product range:Aluminum products.
We serve customers with integrity and welcome friends in need to come to consult and order. Our products and services will surely satisfy you!
Hot Tags: 1050 1060 1100 pure aluminum rod, China 1050 1060 1100 pure aluminum rod manufacturers, suppliers, factory, 1060 Aluminum Round Bar, Industrial Aluminum Round Rods, polished aluminum rod 6063